• 《工程索引》(EI)刊源期刊
  • 综合性科学技术类中文核心期刊
  • 中国科技论文统计源期刊
  • 中国科学引文数据库来源期刊

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

高能量密度锂离子电池层状锰基正极材料研究进展

马磊磊 连芳 张帆 丁鹏冲 刘大亮 陈彦彬

马磊磊, 连芳, 张帆, 丁鹏冲, 刘大亮, 陈彦彬. 高能量密度锂离子电池层状锰基正极材料研究进展[J]. 工程科学学报, 2017, 39(2): 167-174. doi: 10.13374/j.issn2095-9389.2017.02.001
引用本文: 马磊磊, 连芳, 张帆, 丁鹏冲, 刘大亮, 陈彦彬. 高能量密度锂离子电池层状锰基正极材料研究进展[J]. 工程科学学报, 2017, 39(2): 167-174. doi: 10.13374/j.issn2095-9389.2017.02.001
MA Lei-lei, LIAN Fang, ZHANG Fan, DING Peng-chong, LIU Da-liang, CHEN Yan-bin. Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating[J]. Chinese Journal of Engineering, 2017, 39(2): 167-174. doi: 10.13374/j.issn2095-9389.2017.02.001
Citation: MA Lei-lei, LIAN Fang, ZHANG Fan, DING Peng-chong, LIU Da-liang, CHEN Yan-bin. Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating[J]. Chinese Journal of Engineering, 2017, 39(2): 167-174. doi: 10.13374/j.issn2095-9389.2017.02.001

高能量密度锂离子电池层状锰基正极材料研究进展

doi: 10.13374/j.issn2095-9389.2017.02.001
基金项目: 

国家高技术研究发展计划(863计划)资助项目(2013AA050901)

详细信息
  • 中图分类号: TM912.9

Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating

  • 摘要: 层状锰基材料Li[Lix(MnM)1-x]O2(M=Ni,Co,Cr,…)以高比容量成为最具应用前景的正极体系之一,近年来成为研究热点而倍受关注,尤其借助原位测试分析等先进表征手段,对Li[Lix(MnM)1-x]O2的结构及其高容量获取机理的研究取得显著进展.本文概括介绍了高能量密度层状正极材料的结构与充放电机理,重点针对其目前依然存在的问题,详细归纳了Li[Lix(MnM)1-x]O2正极材料充放电循环过程中电压衰减机理、界面/表面特征以及性能改善的研究新进展,而且对高能量密度层状正极材料的未来研究方向也进行了探讨.
  • [1] Lu Z H, MacNeil D D, Dahn J R. Layered cathode materials Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 for lithium-ion batteries. Electrochem Solid State Lett, 2001, 4(11):A191
    [2] Shen C H, Huang L, Lin Z, et al. Kinetics and structural changes of Li-rich layered oxide 0.5Li2MnO3·0.5LiNi0.292Co0.375-Mn0.333O2 material investigated by a novel technique combining in situ XRD and a multipotential step. ACS Appl Mater Interfaces, 2014, 6(15):13271
    [3] Lin C K, Piao Y, Kan Y C, et al. Probing thermally induced decomposition of delithiated Li1.2-xNi0.15Mn0.55Co0.1O2 by in-situ high energy X-ray diffraction. ACS Appl Mater Interfaces, 2014, 6(15):12692
    [4] Yu X Q, Lyu Y C, Gu L, et al. Understanding the rate capability of high-energy-density Li-rich layered Li1.2Ni0.15Co0.1Mn0.55-O2 cathode materials. Adv Energy Mater, 2014, 4(5):1
    [5] Shen C H, Wang Q, Fu F, et al. Facile synthesis of the Li-rich layered oxide Li1.23Ni0.09Co0.12Mn0.56O2 with superior lithium storage performance and new insights into structural transformation of the layered oxide material during charge-discharge cycle:in situ XRD characterization. ACS Appl Mater Interfaces, 2014, 6(8):5516
    [6] Hy S, Felix F, Rick J, et al. Direct in situ observation of Li2O evolution on Li-rich high-capacity cathode material, Li[NixLi(1-2x)/3Mn(2-x)/3]O2(0 ≤ x ≤ 0.5). J Am Chem Soc, 2014, 136(3):999
    [7] Yang F F, Liu Y J, Martha S K, et al. Nanoscale morphological and chemical changes of high voltage lithium-manganese rich NMC composite cathodes with cycling. Nano Lett, 2014, 14(8):4334
    [8] Yu H J, Zhou H S. High-energy cathode materials (Li2MnO3-LiMO2) for lithium-ion batteries. J Phys Chem Lett, 2013, 4(8):1268
    [9] Jarvis K A, Deng Z Q, Allard L F, et al. Atomic structure of a lithium-rich layered oxide material for lithium-ion batteries:evidence of a solid solution. Chem Mater, 2011, 23(16):3614
    [11] Zheng J M, Gu M, Genc A, et al. Mitigating voltage fade in cathode materials by improving the atomic level uniformity of elemental distribution. Nano Lett, 2014, 14(5):2628
    [12] Koga H, Croguennec L, Mannessiez P, et al. Li1.20Mn0.54-Co0.13Ni0.13O2 with different particle sizes as attractive positive electrode materials for lithium-ion batteries:insights into their structure. J Phys Chem C, 2012, 116(25):13497
    [13] Long B R, Croy J R, Dogan F, et al. Effect of cooling rates on phase separation in 0.5Li2MnO3·0.5LiCoO2 electrode materials for Li-ion batteries. Chem Mater, 2014, 26(11):3565
    [14] Yu H J, Ishikawa R, So Y G, et al. Direct atomic-resolution observation of two phases in the Li1.2Mn0.567Ni0.166Co0.067O2 cathode material for lithium-ion batteries. Angew Chem Int Ed, 2013, 52(23):5969
    [15] Yoon W S, Kim N, Yang X Q, et al. 6Li MAS NMR and in situ X-ray studies of lithium nickel manganese oxides. J Power Sources, 2003, 119-121:649
    [16] Bareño J, Lei C H, Wen J G, et al. Local structure of layered oxide electrode materials for lithium-ion batteries. Adv Mater, 2010, 22(10):1122
    [17] Ohzuku T, Nagayama M, Tsuji K, et al. High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries:toward rechargeable capacity more than 300 mA h g-1. J Mater Chem, 2011, 21:10179
    [18] Johnson C S, Kim J S, Lefief C, et al. The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3·(1-x) LiMn0.5Ni0.5O2 electrodes. Electrochem Commun, 2004, 6(10):1085
    [19] Lu Z H, Dahn J R. Understanding the anomalous capacity of Li/Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 cells using in situ X-ray diffraction and electrochemical studies. J Electrochem Soc, 2002, 149(7):A815
    [20] Cao T T, Shi C S, Zhao N Q, et al. Understanding the electrochemical properties of Li-rich cathode materials from first-principles calculations. J Phys Chem C, 2015, 119(52):28749
    [21] Armstrong A R, Holzapfel M, NovaȂk P, et al. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li 0.2Mn0.6]O2. J Am Chem Soc, 2006, 128(26):8694
    [22] Yabuuchi N, Yoshii K, Myung S T, et al. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo1/3Ni1/3Mn1/3O2. J Am Chem Soc, 2011, 133(12):4404
    [23] Song B H, Day S J, Sui T, et al. Mitigated phase transition during first cycle of a Li-rich layered cathode studied by in operando synchrotron X-ray powder diffraction. Phys Chem Chem Phys, 2016, 18(6):4745
    [24] Mohanty D, Li J L, Abraham D P, et al. Unraveling the voltage-fade mechanism in high-energy-density lithium-ion batteries:origin of the tetrahedral cations for spinel conversion. Chem Mater, 2014, 26(21):6272
    [25] Croy J R, Gallagher K G, Balasubramanian M, et al. Quantifying hysteresis and voltage fade in xLi2MnO3·(1-x) LiMn0.5Ni0.5O2 electrodes as a function of Li2MnO3 content. J Electrochem Soc, 2013, 161(3):A318
    [26] Bettge M, Li Y, Gallagher K, et al. Voltage fade of layered oxides:its measurement and impact on energy density. J Electrochem Soc, 2013, 160(11):A2046
    [27] Gallagher K G, Croy J R, Balasubramanian M, et al. Correlating hysteresis and voltage fade in lithium- and manganese-rich layered transition-metal oxide electrodes. Electrochem Commun, 2013, 33:96
    [28] Zheng J M, Xu P H, Gu M, et al. Structural and chemical evolution of Li- and Mn-rich layered cathode material. Chem Mater, 2015, 27(4):1381
    [29] Yan P F, Nie A M, Zheng J M, et al. Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li1.2Ni0.2Mn0.6O2 cathode material for lithium ion batteries. Nano Lett, 2015, 15(1):514
    [30] Hong J, Lim H D, Lee M, et al. Critical role of oxygen evolved from layered Li-excess metal oxides in lithium rechargeable batteries. Chem Mater, 2012, 24(14):2692
    [31] Castel E, Berg E J, El Kazzi M E, et al. Differential electrochemical mass spectrometry study of the interface of xLi2MnO3·(1-x) LiMO2(M=Ni, Co, and Mn) material as a positive electrode in Li-ion batteries. Chem Mater, 2014, 26(17):5051
    [32] Lee D J, Im D M, Ryu Y G, et al. Phosphorus derivatives as electrolyte additives for lithium-ion battery:The removal of O2 generated from lithium-rich layered oxide cathode. J Power Sources, 2013, 243:831
    [33] Wang Q Y, Liu J, Murugan A V, et al. High capacity double-layer surface modified Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode with improved rate capability. J Mater Chem, 2009, 19(28):4965
    [34] Lian F, Gao M, Ma L L, et al. The effect of surface modification on high capacity Li1.375Ni0.25Mn0.75O2+γ cathode material for lithium-ion batteries. J Alloys Compd, 2014, 608:158
    [35] Wu Y, Manthiram A. Effect of surface modifications on the layered solid solution cathodes (1-z) Li[Li1/3Mn2/3]O2-zLi[Mn0.5-yNi0.5-yCo2y]O2. Solid State Ionics, 2009, 180(1):50
    [36] Jin Y C, Duh J G. Fluorination induced the surface segregation of high voltage spinel on lithium-rich layered cathodes for enhanced rate capability in lithium ion batteries. ACS Appl Mater Interfaces, 2016, 8(6):3883
    [37] Kobayashi G, Irii Y, Matsumoto F, et al. Improving cycling performance of Li-rich layered cathode materials through combination of Al2O3-based surface modification and stepwise precycling. J Power Sources, 2016, 303:250
    [38] Kim D H, Sandi G, Croy J R, et al. Composite ‘layered-layered-spinel’ cathode structures for lithium-ion batteries. J Electrochem Soc, 2013, 160(1):A31
    [39] Luo D, Li G S, Fu C C, et al. A new spinel-layered Li-rich microsphere as a high-rate cathode material for Li-ion batteries. Adv Energy Mater, 2014, 4(11):1400062
    [40] Bian X F, Fu Q, Qiu H L, et al. High-performance Li (Li0.18Ni0.15Co0.15Mn0.52) O2@Li4M5O12 heterostructured cathode material coated with a lithium borate oxide glass layer. Chem Mater, 2015, 27(16):5745
    [41] Zhao E Y, Liu X F, Hu Z B, et al. Facile synthesis and enhanced electrochemical performances of Li2TiO3-coated lithium-rich layered Li1.13Ni0.30Mn0.57O2 cathode materials for lithium-ion batteries. J Power Sources, 2015, 294:141
    [42] Jung Y S, Cavanagh A S, Yan Y F, et al. Effects of atomic layer deposition of Al2O3 on the Li[Li0.20Mn0.54Ni0.13Co0.13]O2 cathode for lithium-ion batteries. J Electrochem Soc, 2011, 158(12):A1298
    [43] Liu H, Du C Y, Yin G P, et al. An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries. J Mater Chem A, 2014, 2(37):15640
    [44] Wu F, Li N, Su Y F, et al. Ultrathin spinel membrane-encapsulated layered lithium-rich cathode material for advanced Li-ion batteries. Nano Lett, 2014, 14(6):3550
    [45] Wu Y, Murugan A V, Manthiram A. Surface modification of high capacity layered Li[Li0.2Mn 0.54Ni0.13Co0.13]O2cathodes by AlPO4. J Electrochem Soc, 2008, 155(9):A635
  • 加载中
计量
  • 文章访问数:  455
  • HTML全文浏览量:  96
  • PDF下载量:  11
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-04-25

目录

    /

    返回文章
    返回