郭宏, 余永宁. 合金钢γ-α转变形核驱动力及核心成分的计算[J]. 工程科学学报, 1992, 14(6): 667-671. DOI: 10.13374/j.issn1001-053x.1992.06.014
引用本文: 郭宏, 余永宁. 合金钢γ-α转变形核驱动力及核心成分的计算[J]. 工程科学学报, 1992, 14(6): 667-671. DOI: 10.13374/j.issn1001-053x.1992.06.014
Guo Hong, Yu Yongning. Calculation of γ-α Nuclear Driving Forces and Critical Nucleus Compositions of Alloy Steel[J]. Chinese Journal of Engineering, 1992, 14(6): 667-671. DOI: 10.13374/j.issn1001-053x.1992.06.014
Citation: Guo Hong, Yu Yongning. Calculation of γ-α Nuclear Driving Forces and Critical Nucleus Compositions of Alloy Steel[J]. Chinese Journal of Engineering, 1992, 14(6): 667-671. DOI: 10.13374/j.issn1001-053x.1992.06.014

合金钢γ-α转变形核驱动力及核心成分的计算

Calculation of γ-α Nuclear Driving Forces and Critical Nucleus Compositions of Alloy Steel

  • 摘要: 采用Wagner的动力学模型,计算了含Mn,Si,Ni,Cr,Mo,Cu,V,Nb,W,Co等几种合金元素(合金含量<7%)的多元系低合金钢析出先共析铁素体平衡及仲平衡下的临界核心的成分和形核驱动力。设计了实用的计算程序。

     

    Abstract: On the basis of Wagner's kinetic model, the compositions of critical nucleus and the nuclear driving forces of the precipitation of preutectoid ferrite in the conditions of equilibrium and para-equilibrium for polynary low-alloy steels, containing Mn, Si, Ni, Cr, Mo, Cu, V, Nb, W and Co (the total content<7%), were calculated. A pratical calculated programme was established.

     

/

返回文章
返回