单辊薄带连铸凝固传热数学模型

韩郁文; 张向春; 仇圣桃

doi:10.13374/j.issn1001-053x.1995.03.005

韩郁文, 张向春, 仇圣桃. 单辊薄带连铸凝固传热数学模型[J]. 工程科学学报, 1995, 17(3): 224-228,253. DOI: 10.13374/j.issn1001-053x.1995.03.005

引用本文:

韩郁文, 张向春, 仇圣桃. 单辊薄带连铸凝固传热数学模型[J]. 工程科学学报, 1995, 17(3): 224-228,253. DOI: 10.13374/j.issn1001-053x.1995.03.005

Han Yuwen, Zhang Xiangchun, Chou Shengtao. Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting[J]. Chinese Journal of Engineering, 1995, 17(3): 224-228,253. DOI: 10.13374/j.issn1001-053x.1995.03.005

Citation:

Han Yuwen, Zhang Xiangchun, Chou Shengtao. Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting[J]. Chinese Journal of Engineering, 1995, 17(3): 224-228,253. DOI: 10.13374/j.issn1001-053x.1995.03.005

单辊薄带连铸凝固传热数学模型

Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting

摘要

摘要: 本文以单辊薄带连铸机为研究对象,通过建立传热数学模型,结合热态试验,找出带厚与工艺因素之间的关系,从而为生产出较好质量带坯提供工艺参数。

Abstract: This paper researched the single-roll strip continuous casting. The relatimi between the strip thickness and technological factors are found by way of heat transfer mathematical model and the hot-state experiments. So technological parameters for producing good quality strip are provided.

HTML全文

参考文献(0)

资源附件(0)

/