王邦文, 张正秀, 李谋谓, 刘圣明, 王国平. 1350铝箔轧机轧制压力的数学模型[J]. 工程科学学报, 1997, 19(3): 303-307. DOI: 10.13374/j.issn1001-053x.1997.03.018
引用本文: 王邦文, 张正秀, 李谋谓, 刘圣明, 王国平. 1350铝箔轧机轧制压力的数学模型[J]. 工程科学学报, 1997, 19(3): 303-307. DOI: 10.13374/j.issn1001-053x.1997.03.018
shu
Wang Bangwen, Zhang Zhengxiu, Li Mouwei, Liu Shengming, Wang Guoping. Mathematical Model for Rolling Force of 1350 Foil Mill[J]. Chinese Journal of Engineering, 1997, 19(3): 303-307. DOI: 10.13374/j.issn1001-053x.1997.03.018
Citation: Wang Bangwen, Zhang Zhengxiu, Li Mouwei, Liu Shengming, Wang Guoping. Mathematical Model for Rolling Force of 1350 Foil Mill[J]. Chinese Journal of Engineering, 1997, 19(3): 303-307. DOI: 10.13374/j.issn1001-053x.1997.03.018
shu

1350铝箔轧机轧制压力的数学模型

Mathematical Model for Rolling Force of 1350 Foil Mill

    摘要
  • 摘要: 通过实测获得的大量数据，并以轧制理论为基础，选择了比较合适的模型结构．利用最小二乘法回归出铝箔轧制压力数学模型，模型精度可以满足工程应用的要求．

     

    Abstract: A large quantities of on-site datum were sampled. On the basis of the classical rolling force theory areasonable structure with regard to the model has been selected.The mathematical model is regressed with the least squares method and the same time adaptive algorithm is put forward, analysis of the accuracy is also presented.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回