景志红, 管克智, 李斌, 李爱群. 十字轴的有限元分析[J]. 工程科学学报, 1997, 19(S1): 93-96. DOI: 10.13374/j.issn1001-053x.1997.s1.024
引用本文: 景志红, 管克智, 李斌, 李爱群. 十字轴的有限元分析[J]. 工程科学学报, 1997, 19(S1): 93-96. DOI: 10.13374/j.issn1001-053x.1997.s1.024
shu
Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. DOI: 10.13374/j.issn1001-053x.1997.s1.024
Citation: Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. DOI: 10.13374/j.issn1001-053x.1997.s1.024
shu

十字轴的有限元分析

Analysis of Cross with Finite Element

    摘要
  • 摘要: 针对1549mm轧机十字轴式万向联接轴的十字轴进行有限元分析，找出了十字轴的位移、应力分布规律，并对在均布载荷、三角形分布载荷两种工况下的计算结果进行了比较.

     

    Abstract: Cross pin type universal spindle of 1 549 mm mill is analyzed with finite element.Distribution law of displacement and stress of cross-pin of the universal spindle are determined. Calculated results of cross-pin are compared under uniform load and triangle distributing load.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回