张鹏, 鹿守理, 高永生, 赵辉, 赵俊萍, 曹辉. 板带轧制过程温度场有限元模拟及影响因素分析(Ⅱ)[J]. 工程科学学报, 1998, 20(1): 99-102. DOI: 10.13374/j.issn1001-053x.1998.01.022
引用本文: 张鹏, 鹿守理, 高永生, 赵辉, 赵俊萍, 曹辉. 板带轧制过程温度场有限元模拟及影响因素分析(Ⅱ)[J]. 工程科学学报, 1998, 20(1): 99-102. DOI: 10.13374/j.issn1001-053x.1998.01.022
shu
Zhang Peng, Lu Shouli, Gao Yongsheng, Zhao Hui, Zhao Junping, Cao Hui. Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM(Ⅱ)[J]. Chinese Journal of Engineering, 1998, 20(1): 99-102. DOI: 10.13374/j.issn1001-053x.1998.01.022
Citation: Zhang Peng, Lu Shouli, Gao Yongsheng, Zhao Hui, Zhao Junping, Cao Hui. Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM(Ⅱ)[J]. Chinese Journal of Engineering, 1998, 20(1): 99-102. DOI: 10.13374/j.issn1001-053x.1998.01.022
shu

板带轧制过程温度场有限元模拟及影响因素分析(Ⅱ)

Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM(Ⅱ)

    摘要
  • 摘要: 采用弹塑性大变形热力耦合有限元法研究了钢板热轧过程,侧重计算轧件厚向温度分布,并分析了热传导模型、轧辊温度变化对计算结果的影响.计算结果与实验结果比较符合.

     

    Abstract: The hot rolling of steel plate was studied with the aid of elastic-plastic and thermal-mechanical coupled FEM, particular attention was paid to predict the tempera-ture distribution through the thickness of rolled plate. The influences of heat transfer model and variation of roll temperature on calculated result were analyzed. Comparison of the calculated results with those from experiment showed good agreement.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回