罗永军, 王长松, 刘江, 张杰, 李江洁, 孙克. 热连轧机AGC系统的动态仿真[J]. 工程科学学报, 2004, 26(2): 174-176. DOI: 10.13374/j.issn1001-053x.2004.02.015
引用本文: 罗永军, 王长松, 刘江, 张杰, 李江洁, 孙克. 热连轧机AGC系统的动态仿真[J]. 工程科学学报, 2004, 26(2): 174-176. DOI: 10.13374/j.issn1001-053x.2004.02.015
shu
LUO Yongjun, WANG Zhangsong, LIU Jiang, ZHANG Jie, LI Jiangjie, SUN Ke. Dynamic Simulation for the AGC of Hot Strip Mills[J]. Chinese Journal of Engineering, 2004, 26(2): 174-176. DOI: 10.13374/j.issn1001-053x.2004.02.015
Citation: LUO Yongjun, WANG Zhangsong, LIU Jiang, ZHANG Jie, LI Jiangjie, SUN Ke. Dynamic Simulation for the AGC of Hot Strip Mills[J]. Chinese Journal of Engineering, 2004, 26(2): 174-176. DOI: 10.13374/j.issn1001-053x.2004.02.015
shu

热连轧机AGC系统的动态仿真

Dynamic Simulation for the AGC of Hot Strip Mills

    摘要
  • 摘要: 参照某热轧厂实际情况建立了热连轧AGC系统的动态模型,通过该模型进行动态仿真,研究了各种参数变化对于轧件出口厚度的影响。结果表明,该模型繁简适度,有利于对多种因素进行分析。

     

    Abstract: According to the fact of hot strip mills, a dynamic simulation model was put forward, and the dynamic simulation for the AGC of hot strip mills was implemented. The effects of some factor on the products was researched. The results show that the model is simple and appropriate and is suitable for analysis of multiple factors.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回