张婷, 许浩, 李仲杰, 董安平, 邢辉, 杜大帆, 孙宝德. 层状金属复合材料的发展历程及现状[J]. 工程科学学报, 2021, 43(1): 67-75. DOI: 10.13374/j.issn2095-9389.2020.06.17.002
引用本文: 张婷, 许浩, 李仲杰, 董安平, 邢辉, 杜大帆, 孙宝德. 层状金属复合材料的发展历程及现状[J]. 工程科学学报, 2021, 43(1): 67-75. DOI: 10.13374/j.issn2095-9389.2020.06.17.002
ZHANG Ting, XU Hao, LI Zhong-jie, DONG An-ping, XING Hui, DU Da-fan, SUN Bao-de. Development and present situation of laminated metal composites[J]. Chinese Journal of Engineering, 2021, 43(1): 67-75. DOI: 10.13374/j.issn2095-9389.2020.06.17.002
Citation: ZHANG Ting, XU Hao, LI Zhong-jie, DONG An-ping, XING Hui, DU Da-fan, SUN Bao-de. Development and present situation of laminated metal composites[J]. Chinese Journal of Engineering, 2021, 43(1): 67-75. DOI: 10.13374/j.issn2095-9389.2020.06.17.002

层状金属复合材料的发展历程及现状

Development and present situation of laminated metal composites

  • 摘要: 三十多年来,多种层状金属复合材料的制备方法应运而生,蓬勃发展,包括爆炸复合法、轧制复合法、热压扩散法和沉积复合法等。爆炸复合法在中厚板的制备上具有不可替代的优势,其产品广泛应用于军工、船舶、电力和化工等领域。轧制法可以批量生产大尺寸层压板,应用最为广泛,目前层压板已经广泛用于汽车、船舶和航空航天等领域。真空热压扩散法由于可以避免氧气等气体的污染,几年来在Ti/Al、Ti/TiAl和Ti6Al4V/TiAl层状复合材料的制备上备受关注。沉积复合法制备的层状金属复合材料在作为耐蚀、耐磨涂层,高强导线,人体植入材料方面表现出巨大的潜力。在综述层状金属复合材料发展历程的基础上,介绍了层状金属复合材料的制备方法及各自的优缺点,并对层状金属复合材料目前在国内外的研究现状进行了分析和介绍。

     

    Abstract: Laminated metal composites are composed of two or more metals or alloys, which integrate various excellent properties of the component materials and exhibit good comprehensive properties. The history of laminated metal composites can be traced back to more than 800 BC, and their systematic research began in the 1970s. Over the past 30 years, various methods have been invented to fabricate laminated metal composites, including explosive bonding, rolling bonding, hot-pressing bonding, and deposition bonding. Explosive bounding method has irreplaceable advantages in the preparation of medium thick plates with its products being widely used in military industry, ship, electric power, chemical industry, and other fields. On the other hand, rolling bonding is most widely used because of its ability of large quantity production. Cold roll bonding (CRB) and accumulative roll bonding (ARB) are two representative laminate preparation technologies that are utilized in the fabrication of a large number of material systems. Up to now, laminates prepared by rolling bonding are widely used in automobile, ship, aerospace, and other fields. The preparation of Ti/Al, Ti/TiAl, and Ti6Al4V/TiAl layered composites via vacuum hot-pressing bonding has attracted much attention in recent years because of its ability to avoid gas pollution such as oxygen production. Moreover, laminated metal composites produced by deposition bonding have great potential as corrosion resistant coatings, wear-resistant coatings, and high-strength conductors and implants. Although laminated metal composites have been well developed, there are still various problems to be solved. For some soft/hard material systems, the hard layer introduces plastic instability during the rolling process that destroys the continuity between layers. As a consequence, serious weakening of the comprehensive performance of the laminates is observed. Furthermore, only few studies on the design and new processes of laminated metal materials have been conducted. This paper reviewed the development of laminated metal composites, introduced the preparation methods and advantages and disadvantages of layered metal composites, and analyzed the research status of laminated metal composites at home and abroad.

     

/

返回文章
返回