column
Method of Computation of Blasting Carbon Monoxide Emission Quantity in the Open-Pit
Zhang Xingkai, Li Huaiyu
1996, 18(3): 201-205. DOI: 10.13374/j.issn1001-053x.1996.03.001
Abstract PDF
Effect of Solid Particle on Spool Valves Surfaces
Li Fangjun, Gao Lanqing, Zhou Shiyu
1996, 18(3): 206-209. DOI: 10.13374/j.issn1001-053x.1996.03.002
Abstract PDF
Resistant Calculation of the Airflow in the Bend Passages and Its Experimental Verification
Jiang Zhongan, Li Huaiyu, Du Cuifeng
1996, 18(3): 210-214. DOI: 10.13374/j.issn1001-053x.1996.03.003
Abstract PDF
Fractal in Fault Diagnosis of Rolling Bearings
Zhang Wenming, Li Li, Shen Yanhua, Wang Ying, Wang Weigang
1996, 18(3): 215-219. DOI: 10.13374/j.issn1001-053x.1996.03.004
Abstract PDF
Expert System Based on Neural Networks for Predicting and Judging the State of Blast Furnace
Yang Shangbao, Yang Tianjun, Dong Yicheng
1996, 18(3): 220-225. DOI: 10.13374/j.issn1001-053x.1996.03.005
Abstract PDF
Buildup of Simulating Model for Full Continuous Casting Production Scheduling System
Tian Naiyuan, Wu Xiaodong
1996, 18(3): 226-230. DOI: 10.13374/j.issn1001-053x.1996.03.006
Abstract PDF
Carbonization (Nitrogenation) for Titanium-Bearing Blast Furnace Slag by Plasma Furnace
Li Hui, Chou Yongquan, Yang Zeqi
1996, 18(3): 231-235. DOI: 10.13374/j.issn1001-053x.1996.03.007
Abstract PDF
Determination of Trace Gallium by Extraction-Photometric Method with Ethyl Rhodamine B
Li Jingjie, Wan Xuhui, Deng Changli, Shao Guang
1996, 18(3): 236-240. DOI: 10.13374/j.issn1001-053x.1996.03.008
Abstract PDF
Injection Molding of Coarser Stainless Steel Powder
Jia Chengchang, Lu Xiaosen, Jie Zizhang, Zhu Jiaxi
1996, 18(3): 241-244. DOI: 10.13374/j.issn1001-053x.1996.03.009
Abstract PDF
Formation Mechanism of Hercynite Contained in Ceramic Layer of Ceramic Lined Steel Pipe
Liu Mu, Yin Sheng, Lai Heyi, Wei Yanping
1996, 18(3): 245-248. DOI: 10.13374/j.issn1001-053x.1996.03.010
Abstract PDF
Influence of Substitutional Elements on the Ductility and Oxidation Behaviour of Fe3Al Intermetallics
Yang Wangyue, Sheng Lizhen, Xu Feng, Huang Yuanding, Sun Zuqing
1996, 18(3): 249-254. DOI: 10.13374/j.issn1001-053x.1996.03.011
Abstract PDF
Quality Analysis of Cast K6 Alloy Blades
Zhao Junhua
1996, 18(3): 255-258. DOI: 10.13374/j.issn1001-053x.1996.03.012
Abstract PDF
Computer Simulation on Jet-Pump Lifting System of Ocean Mining
Liu Yongcai, Cheng Huojin, Peng Longzhou, Chen Yongliang
1996, 18(3): 259-262. DOI: 10.13374/j.issn1001-053x.1996.03.013
Abstract PDF
Mathematical Model on Flow Stress of Aluminium Alloys in Hot Plastic Deformation
Zhang Shaojun, Zhou Jihua, Gao Yongsheng, Lun Yixin, Wang Zaiying
1996, 18(3): 263-266. DOI: 10.13374/j.issn1001-053x.1996.03.014
Abstract PDF
Intelligent Fuzzy Controller and Its Application
Zheng Baoyuan
1996, 18(3): 267-271. DOI: 10.13374/j.issn1001-053x.1996.03.015
Abstract PDF
Application of ESZ Principle in On-Line Measurements of Non-Metallic Inclusions
Shen Yaxi, Wang Shaochun, Liu Xinhua
1996, 18(3): 272-275,284. DOI: 10.13374/j.issn1001-053x.1996.03.016
Abstract PDF
DSP-Based AC Servo System
Wang Zhiliang, Hao Yudong, Hu Hanjin, Xie Lun
1996, 18(3): 276-279. DOI: 10.13374/j.issn1001-053x.1996.03.017
Abstract PDF
Influences of ZrO2 on Mechanical Properties in Magnesia Spinel
Sun Jialin, Hong Yanruo
1996, 18(3): 280-284. DOI: 10.13374/j.issn1001-053x.1996.03.018
Abstract PDF
Mössbauer Spectroscopy of α'-Phase of Fe- 69.7%Cr Alloy at Low Temperature
Cai Jiamin
1996, 18(3): 285-289. DOI: 10.13374/j.issn1001-053x.1996.03.019
Abstract PDF
Determination of Trace Scandium in Sefströmite and Slags by ICP-AE
Zhang Zangshu, Li Jingjie, Shao Guang
1996, 18(3): 290-294. DOI: 10.13374/j.issn1001-053x.1996.03.020
Abstract PDF
Simulation of Chinese Dynamic Output Model
Wang Peiling, Zhao Lei
1996, 18(3): 295-298. DOI: 10.13374/j.issn1001-053x.1996.03.021
Abstract PDF