column
A New Non-invasive Flow Measuring Method
Zhu Hailin, Zou Jing, Gao Lanqing, Zhang Wenming
1997, 19(5): 421-424. DOI: 10.13374/j.issn1001-053x.1997.05.001
Abstract PDF
General System for Deciding Rational Grade of Crude Ore
Li Keqing, Liu Baoshun, Zhang Wenping
1997, 19(5): 425-428. DOI: 10.13374/j.issn1001-053x.1997.05.002
Abstract PDF
Interaction and Corelation of Reagents in Flotation Systerm of Rare-earth Mineral
Ren Jun, Lu Shouci
1997, 19(5): 429-433. DOI: 10.13374/j.issn1001-053x.1997.05.003
Abstract PDF
Interface Bonding Strength of Composite White Cast Iron Embedded Steel Bar
Zhao Aimin
1997, 19(5): 434-437. DOI: 10.13374/j.issn1001-053x.1997.05.004
Abstract PDF
Statistical Analysis of Technological Parameters in Centrifugal Casting of Steel Pipes
Yan Xiaobo, Zhai Qijie, Wu Yue, Wang Weiwei
1997, 19(5): 438-440. DOI: 10.13374/j.issn1001-053x.1997.05.005
Abstract PDF
Microstructural Stability after Long Time Aging in GH132(A-286) Superalloy
Zhang Wenquan, Dong Jianxin, Zhang Li, Xu Zhichao, Xie Xishan
1997, 19(5): 441-445. DOI: 10.13374/j.issn1001-053x.1997.05.006
Abstract PDF
Applying the Reduced Pressure Sample Density to Predict the Hydrogen Blow Hole Degree of Aluminium Alloy Casting
Mao Weimin, Zhong Taoxing
1997, 19(5): 446-450. DOI: 10.13374/j.issn1001-053x.1997.05.007
Abstract PDF
Influence of Pole Figure Status on ODF Analysis
Zhao Zisu, Mao Weimin, Yu Yongning
1997, 19(5): 451-456. DOI: 10.13374/j.issn1001-053x.1997.05.008
Abstract PDF
Melt-Penetrating Process and Penetration
Ren Xueping, Wang Lianzhong, Qi Lehua
1997, 19(5): 457-461. DOI: 10.13374/j.issn1001-053x.1997.05.009
Abstract PDF
Surface Metallization of Diamond
Wang Lan, Gao Xuexu
1997, 19(5): 462-466. DOI: 10.13374/j.issn1001-053x.1997.05.010
Abstract PDF
Prediction of Properties of IF Steel Using Neural Network Model
Jiang Jianhua, Ma Yanwei, Wang Xianjin
1997, 19(5): 467-470. DOI: 10.13374/j.issn1001-053x.1997.05.011
Abstract PDF
Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM (I)
Zhang Peng, Lu Shouli, Gao Yongsheng, Zhao Hui, Zhao Junping, Cao Hui
1997, 19(5): 471-475. DOI: 10.13374/j.issn1001-053x.1997.05.012
Abstract PDF
Investigation of the Rust on a New Kind of Low Alloy Steel (10CrCuSiV) for Resistance Sea-corrosion
Xiao Heng, Wang Song, Huang Zhenzhong, Lin Dingyi
1997, 19(5): 476-481. DOI: 10.13374/j.issn1001-053x.1997.05.013
Abstract PDF
Reliability of Gear-Tooth Bending Fatigu Strength for Through Hardened and Tempered Steel 40Cr
Tao Jin, Wang Xiaoqun, Tan Jiazhen
1997, 19(5): 482-484. DOI: 10.13374/j.issn1001-053x.1997.05.014
Abstract PDF
Object-Oriented Application System Design Based on Multithreading under Windows NT
Wang Chengyao, Li Xiushan, Pang Wei
1997, 19(5): 485-489,494. DOI: 10.13374/j.issn1001-053x.1997.05.015
Abstract PDF
Two Improved Study Algorithms for Neural Network Structure
Wang Kecheng, Wang Kejun, Yu Datai
1997, 19(5): 490-494. DOI: 10.13374/j.issn1001-053x.1997.05.016
Abstract PDF
A New Kind of Self-organization Fuzzy Controller Based on Neural Network with Expert Adjusting Ability
Zheng Deling, Lian Jinsheng
1997, 19(5): 495-500. DOI: 10.13374/j.issn1001-053x.1997.05.017
Abstract PDF
Application of Intelligent Information Processing to Deducing Agglomerate Quality
Sun Tie, Wang Fenhua, Guo Xiurong
1997, 19(5): 501-504. DOI: 10.13374/j.issn1001-053x.1997.05.018
Abstract PDF
Experimental Study of Internal Friction of a-Si:H Films Charged with Hydrogen
Wu Ping
1997, 19(5): 505-509. DOI: 10.13374/j.issn1001-053x.1997.05.019
Abstract PDF
Quantitative Relationship Between Mechanical Properties and Chemocal Compositions of Steels Made by Anshan Iron and Steel Corporation
Yu Zongsen, Yuan Zexi, Li Dingxiu, Li Shiqi, Wu Jun
1997, 19(5): 510-515. DOI: 10.13374/j.issn1001-053x.1997.05.020
Abstract PDF
Temperature Distribution of Different Graphite Tubes and Relations to Their Analytic Properties
Li Jianqiang, Xuan Weikang
1997, 19(5): 516-519. DOI: 10.13374/j.issn1001-053x.1997.05.021
Abstract PDF
Descending Order Condition of Two Forms of Third-order Linear Differential Equations
Li Angui, Wu Tan
1997, 19(5): 520-524. DOI: 10.13374/j.issn1001-053x.1997.05.022
Abstract PDF