column
Determination on Mechanics-Physics Model of Controlled BlastDemolition for Towery tubular Structure
He Jun, Yu Yalun, Wang Shuanghong, Zhang Haitao
1998, 20(6): 507-512. DOI: 10.13374/j.issn1001-053x.1998.06.001
Abstract PDF
Development of the Method of CollectingDust with the Separate Dust Curtain
Jin Longzhe, Jiang Zhongan, Jin Ruiying, Fan Wenbin, Wang Shiying
1998, 20(6): 513-516. DOI: 10.13374/j.issn1001-053x.1998.06.002
Abstract PDF
Numerical Simulation of Direct Reduction Process of Carbon-Bearing Pellets
Wang Aijun, Wang Shanghuai
1998, 20(6): 517-521. DOI: 10.13374/j.issn1001-053x.1998.06.003
Abstract PDF
Effects of Temperature and Sulfur Content on Kinetics of Nitrogen Removal of Liquid Steel
Zhou Shixiang, Fu Jie, Wang Ping
1998, 20(6): 522-526. DOI: 10.13374/j.issn1001-053x.1998.06.004
Abstract PDF
Structure and Property of Heating WorkingQ235 Bloom by EPM Treated
Wang Jianzhong, Xue Qingguo, Wang Jingsong, Cang Daqiang, Tang Yong
1998, 20(6): 527-530. DOI: 10.13374/j.issn1001-053x.1998.06.005
Abstract PDF
Researches on the Optimization of Cold Pressing of Ag-clad Bi-2223 Superconducting Tapes
Ma Yanwei, Wang Xianjin, Wang Zutang
1998, 20(6): 531-535. DOI: 10.13374/j.issn1001-053x.1998.06.006
Abstract PDF
Aging Procedure and Its Hardness Change from Single β-Ti Phase to α+Ti2Co Dual Phase of Alloy Ti-12Co-5Al
Hu Xiaohua, Chen Guoliang, Yang Wangyue, Xu Jialong
1998, 20(6): 536-540. DOI: 10.13374/j.issn1001-053x.1998.06.007
Abstract PDF
Heat Transfer Analysis and Heat Transfer Coefficient Determination of Stainless Steel
Cao Hui, Zhang Peng, Gao Yongsheng, Tian Xiaochun, Wang Quanli
1998, 20(6): 541-544,555. DOI: 10.13374/j.issn1001-053x.1998.06.008
Abstract PDF
Macrostructure of Thermal Analysis Samples of Cast Iron and Other Factors' Effect on It
Mao Weimin, Zhong Xueyou, Zhao Aimin
1998, 20(6): 545-549. DOI: 10.13374/j.issn1001-053x.1998.06.009
Abstract PDF
Critical Pulling Velocity and Its Effect Factors during Continuous Unidirectional Solidification
Chang Guowei, Wang Zidong, Hu Hanqi, Zhang Hu, Wang Jingsong
1998, 20(6): 550-555. DOI: 10.13374/j.issn1001-053x.1998.06.010
Abstract PDF
Fabrication of Unidirectional Fibrous Crystal Reinforced Super High Strength Steel Wire
Xie Jianxin, Wang Zidong, Wu Chunjing, Hu Hanqi, Li Jingyuan, Chang Guowei
1998, 20(6): 556-559. DOI: 10.13374/j.issn1001-053x.1998.06.011
Abstract PDF
Microstructure and Magnetic Properties of Hot-pressing Cast PrFeB Permanent Magnetic Alloys
Zhou Shouzeng, Dong Qingfei, Shi Zhenhua, Zhang Shouhua
1998, 20(6): 560-563. DOI: 10.13374/j.issn1001-053x.1998.06.012
Abstract PDF
Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (3)——Model of Friction Moment which Affect the Stability of Rolls
Yan Xiaoqiang, Liu Xianli, Yang Shula, Xia Yonghai
1998, 20(6): 564-567. DOI: 10.13374/j.issn1001-053x.1998.06.013
Abstract PDF
Test Research on Reliability of Gear-tooth Bending Fatique Strength for Through Hardening Steel 37SiMn2MoV
Tao Jin, Shi Tiejun, Cui Xingshan, Tan Jiazhen
1998, 20(6): 568-570. DOI: 10.13374/j.issn1001-053x.1998.06.014
Abstract PDF
Neural Network PID Control
Du Jianfeng, Cui Yong, Zhang Hansong, Yan Zhonghui
1998, 20(6): 571-575. DOI: 10.13374/j.issn1001-053x.1998.06.015
Abstract PDF
AC Servo System Based on Neruon Controller
Xie Lun, Wang Zhiliang, MASAEAKE NAGAI, Liu Huan, Zhao Tao
1998, 20(6): 576-578. DOI: 10.13374/j.issn1001-053x.1998.06.016
Abstract PDF
Dynamic Control of Adaptive Static Model of 25t Converters
Xia Shenghua, Yu Datai, Cao Tongle
1998, 20(6): 579-584. DOI: 10.13374/j.issn1001-053x.1998.06.017
Abstract PDF
Development of Specification of Program Based on ECC
Cai Jiamei, Du Guowei
1998, 20(6): 585-589. DOI: 10.13374/j.issn1001-053x.1998.06.018
Abstract PDF
Conjugate Analysis for Confocal Fabry-Perot Onterferometer
Ding Hongsheng, Tan Zhonghui, Gong Yuliang
1998, 20(6): 590-593. DOI: 10.13374/j.issn1001-053x.1998.06.019
Abstract PDF
Color Developmeat Reaction in the Temary System of Sc(Ⅲ)-CPA-pc-Ⅰ- and Its Analytical Application
Wen Meijuan, Dou Shengqin
1998, 20(6): 594-597. DOI: 10.13374/j.issn1001-053x.1998.06.020
Abstract PDF
^Quality Control and Diagnosis for Small Volume Based on Bayesian Analysis
Ka Xiangmin, Sun Jing, Zhang Gongxu
1998, 20(6): 598-603. DOI: 10.13374/j.issn1001-053x.1998.06.021
Abstract PDF
Business Risk and Leverage Principle
Quan Jie, Chen Jingyun
1998, 20(6): 604-608. DOI: 10.13374/j.issn1001-053x.1998.06.022
Abstract PDF