column
New Technology of Toner Preparation with Mineral Pigments Surface Modification and Suspension Copolymerization
ZHANG Qiang, WANG Huajun, YANG Jun, DUAN Yufeng
2001, 23(5): 389-392. DOI: 10.13374/j.issn1001-053x.2001.05.001
Abstract PDF
Sulfide Phases and Their Evolution in Mantle Xenoliths from Changbaishan Mountain District in China
XU Jiuhua, XIE Yuling, Bodnar R J, WANG Liquan, LIU Yan
2001, 23(5): 393-397. DOI: 10.13374/j.issn1001-053x.2001.05.002
Abstract PDF
Hydraulic Characteristics of Weakly Acid Cation Exchange Resin
CHEN Xiuzhi, TANG Ruibin, LI Caifang, SONG Cunyi
2001, 23(5): 398-400. DOI: 10.13374/j.issn1001-053x.2001.05.003
Abstract PDF
Reduction and Re-oxidation Behavior of Si during Smelting Reduction Process
GAO Bin, YANG Tianjun
2001, 23(5): 401-403. DOI: 10.13374/j.issn1001-053x.2001.05.004
Abstract PDF
Synthesis of Ca-α-Sialon-SiC Powders from Blast Furnace Slag and Optimization of Its Synthesis Process
LIU Keming, WANG Fuming, LI Wenchao, XIE Lijun, GUO Yuyan
2001, 23(5): 404-408. DOI: 10.13374/j.issn1001-053x.2001.05.005
Abstract PDF
Defect Chemistry of Stronitum Titanate
LUO Shiyong, ZHANG Jiayun
2001, 23(5): 409-413. DOI: 10.13374/j.issn1001-053x.2001.05.006
Abstract PDF
Assessment of Self-diffusion Parameters in Alumina Single Crystals
LUO Shiyong, ZHANG Jiayun
2001, 23(5): 414-417. DOI: 10.13374/j.issn1001-053x.2001.05.007
Abstract PDF
Research on the Heat Turnover of 300 t Ladle in Bao Steel Industry
WU Xiaodong, LIU Qing, XU Anjun, TIAN Naiyuan, ZHI Jianjun
2001, 23(5): 418-420,459. DOI: 10.13374/j.issn1001-053x.2001.05.008
Abstract PDF
Influence of Cooling Rate on Crystallization Properties of Mold Fluxes
SHU Jun, JIN Shantong, ZHANG Li, CAO Weiwen, SONG Renbo, WANG Xiangguang
2001, 23(5): 421-423. DOI: 10.13374/j.issn1001-053x.2001.05.009
Abstract PDF
Analysis on Heat Transfer Phenomena in Continuous Casting Mould by Singular Perturbation Method and Its Numerical Calculation
SUN Renji, CHEN Mingwen, XUE Yongge
2001, 23(5): 424-428. DOI: 10.13374/j.issn1001-053x.2001.05.010
Abstract PDF
Electronic Structures and Conductivities in RECrO3 Systems
QING Jia, CHEN Ning, MA Li, LI Yang, LIU Senying
2001, 23(5): 429-431. DOI: 10.13374/j.issn1001-053x.2001.05.011
Abstract PDF
Simulation on the SCC Susceptibility of Pipeline steel in Soil Rich in Nitrate
CAO Bei, WU Yinshun
2001, 23(5): 432-434. DOI: 10.13374/j.issn1001-053x.2001.05.012
Abstract PDF
Compound Artificial Synovia in Orthogonal Test
YU Luqing, LI Jiuqing, GU Zhengqiu, ZHANG Bei
2001, 23(5): 435-438,484. DOI: 10.13374/j.issn1001-053x.2001.05.013
Abstract PDF
Experimental Study on Semi-solid Steels for Rheorolling
SONG Renbo, KANG Yonglin, SUN Jianlin, ZHAO Aimin, MAO Weimin
2001, 23(5): 439-441. DOI: 10.13374/j.issn1001-053x.2001.05.014
Abstract PDF
Fabrication of the Sheets for Fe3Si Based Alloy
LIN Junpin, ZHONG Taibin, LIN Zhi, CHEN Guoliang
2001, 23(5): 442-444. DOI: 10.13374/j.issn1001-053x.2001.05.015
Abstract PDF
Methods to Improve the Sensitivity and Stability of CFPI for Surface Ultrasonic Vibration Detection
DING Hongsheng, TONG Lige, YIN Hong, GONG Yuliang
2001, 23(5): 445-448. DOI: 10.13374/j.issn1001-053x.2001.05.016
Abstract PDF
Research of Grinding Teeth Burn and Crack and Thier Thermal Damage Layer
TAO Xiaojie, WANG Kaikun, LI Chaorong
2001, 23(5): 449-451. DOI: 10.13374/j.issn1001-053x.2001.05.017
Abstract PDF
Variation Mechanism and Its Solution of Decoupling Technological Parameters for the Combined Shape and Gauge Control System in Hot Strip Mills
CAO Jianguo, ZHANG Jie, CHEN Xianlin, WEI Gangcheng, YANG Jinan, HUANG Siqing
2001, 23(5): 452-455. DOI: 10.13374/j.issn1001-053x.2001.05.018
Abstract PDF
Emulating of the Equal-roller-distance Leveling Operation Straightening Process
JING Yongshui, DOU Zhongqiang, LI Zhongfu
2001, 23(5): 456-459. DOI: 10.13374/j.issn1001-053x.2001.05.019
Abstract PDF
Effect of Powder Coal Granularity on Its Combustion
FENG Junxiao, LE Kai, LIU Yingshu, HOU Qingwen
2001, 23(5): 460-462. DOI: 10.13374/j.issn1001-053x.2001.05.020
Abstract PDF
Forming and Curbing of Plate Bending in Jobbing Sheet Rolling Process(5)—Rolling line height and offset effecting plate bending
YAN Xiaoqiang, ZHANG Fumin, DAN Weichun, CHENG Wei
2001, 23(5): 463-465. DOI: 10.13374/j.issn1001-053x.2001.05.021
Abstract PDF
General Principle and Method for Product Quality Design Based on Probabilitic Model
CHEN Lizhou, REN Guanhua
2001, 23(5): 466-469. DOI: 10.13374/j.issn1001-053x.2001.05.022
Abstract PDF
An Efficient Algorithm for Two-Dimension Heat-conduction Equation ETF-FDS-MG
DUAN Yali, ZHANG Xiaodan
2001, 23(5): 470-473. DOI: 10.13374/j.issn1001-053x.2001.05.023
Abstract PDF
Chaotic Pattern Distinction Based on Wavelet Neural Network
JIANG Yadong, DING Liping, XIA Kejian, LI Ke, CHEN Yinqi
2001, 23(5): 474-477. DOI: 10.13374/j.issn1001-053x.2001.05.024
Abstract PDF
An Indexing System for Phase Diagram of Aluminum Electrolyte Based on Multimedia and Internet
BAO Hong, LIU Zhao
2001, 23(5): 478-480. DOI: 10.13374/j.issn1001-053x.2001.05.025
Abstract PDF
Stabilization of Chaos by Self-adaptive PSD State-delayed Feedback Algorithm Based on Single Neuron
LI Qing, ZHENG Deling, YANG Linhao, LU Yifang
2001, 23(5): 481-484. DOI: 10.13374/j.issn1001-053x.2001.05.026
Abstract PDF