column
Monitoring and Analysis of the Damage Height of overburden Rock Mass on the Mined-out Area
REN Fenhua, CAI Meifeng, LAI Xingping, KANG Yonghua, LIU Zhiguo
2004, 26(2): 115-117. DOI: 10.13374/j.issn1001-053x.2004.02.001
Abstract PDF
Rollback Law of Reverse Smoke Flow in a Horizontal Airway during Mine Fire
ZHOU Xinquan, WANG Haiyan, ZHAO Hongze
2004, 26(2): 118-121. DOI: 10.13374/j.issn1001-053x.2004.02.002
Abstract PDF
Lead-Containing Waste Water by Using Granular Sludge as a Media at Ambinent Temperature
HAN Jianhong, NI Wen, SONG Cunyi, YAN Kejun, WANG Ronghui
2004, 26(2): 122-124. DOI: 10.13374/j.issn1001-053x.2004.02.003
Abstract PDF
Experimental Study on Nitrogen Solubility in Molten Iron and Denitrification during Hot Metal Pretreatment
WU Baoguo, DONG Yuanchi, ZHOU Yun, WANG Haichuan, WANG Shijun
2004, 26(2): 125-129. DOI: 10.13374/j.issn1001-053x.2004.02.004
Abstract PDF
Numerical simulation of Liquid Steel Solidification in Slab Molds
ZHANG Jiongming, ZHANG Li, YANG Huitao, WANG Xinhua
2004, 26(2): 130-134. DOI: 10.13374/j.issn1001-053x.2004.02.005
Abstract PDF
Modeling of Dense Particle-Gas Two-phase Reacting Flow in Lagrangian Approach
LIU Xiangjun, XU Xuchang
2004, 26(2): 135-138. DOI: 10.13374/j.issn1001-053x.2004.02.006
Abstract PDF
Microstructure Evolution Analysis of 302HQA Stainless Steel during the Cold Forming Process
ZHANG Maicang, DONG Jianxin, CENG Yanping, CENG Fan
2004, 26(2): 139-141. DOI: 10.13374/j.issn1001-053x.2004.02.007
Abstract PDF
Shrinkage Kinetics of Nanoscaled W-Cu Alloy during Hotpressing Sintering
XU Jinlong, ZHANG Liying, CUI Feng'e, TAN Yuxin, WU Chengyi
2004, 26(2): 142-147. DOI: 10.13374/j.issn1001-053x.2004.02.008
Abstract PDF
Electrochemical Behavior of Hot-Dipped Zn-0.2Al-Mg-Re Alloy Coating on Steel Wire in NaC1 Solution
ZHANG Li, LU Yanping, QU Zuyu
2004, 26(2): 148-151. DOI: 10.13374/j.issn1001-053x.2004.02.009
Abstract PDF
Phase Diagram of Binary System PE-TAM for Storage Heat Materials
WU Kezhong, WANG Xindong, LIU Xiaodi, SUN Yue
2004, 26(2): 152-155. DOI: 10.13374/j.issn1001-053x.2004.02.010
Abstract PDF
Comparison and Analysis on Frictional Characteristics of Poly (Vinyl Alcohol) Hydrogel and Human Articular Cartilage
LI Yong, GAO Jin, LIU Guoquan, GU Zhengqiu, MA Yuanzheng, XUE Haibin
2004, 26(2): 156-158. DOI: 10.13374/j.issn1001-053x.2004.02.011
Abstract PDF
Analysis on Driveline Arrangment and its Angular Velocity Fluctuation
YANG Jue, ZHANG Wenming, NING Xiaobin
2004, 26(2): 159-163. DOI: 10.13374/j.issn1001-053x.2004.02.012
Abstract PDF
Numerical Simulation for the Temperature Field of Slabs Heated in a Walking Beam Type of Re-heating Fumace
QING Gele, CHENG Susen, YANG Tianjun, LI Shiqi
2004, 26(2): 164-168. DOI: 10.13374/j.issn1001-053x.2004.02.013
Abstract PDF
Flow-Jet Boiling Cooling Enhancing Mechanism
WANG Bangwen, LI Mouwei, WU Zongjian, LIU Guoyong, LI Shengyong, CUI Naizhong, JIN Zhe
2004, 26(2): 169-173. DOI: 10.13374/j.issn1001-053x.2004.02.014
Abstract PDF
Dynamic Simulation for the AGC of Hot Strip Mills
LUO Yongjun, WANG Zhangsong, LIU Jiang, ZHANG Jie, LI Jiangjie, SUN Ke
2004, 26(2): 174-176. DOI: 10.13374/j.issn1001-053x.2004.02.015
Abstract PDF
Self-Adaptive Decoupling in a Shape and Gauge Control System
PENG Kaixiang, TONG Chaonan, WANG Lu
2004, 26(2): 177-180. DOI: 10.13374/j.issn1001-053x.2004.02.016
Abstract PDF
PID Decoupling Control Based on the Subsection Liner Model of FGC for Tandem Cold Rolling
WANG Xiuyan, GE Ping, WANG Zhenglin, SUN Yikang, FU Jian
2004, 26(2): 181-183. DOI: 10.13374/j.issn1001-053x.2004.02.017
Abstract PDF
Accurate Diagnosis of Rolling Bearing Based on Wavelet Packet and RBF Neural Networks
WANG Guofeng, WANG Ziliang, QIN Xuda, WANG Taiyong
2004, 26(2): 184-187. DOI: 10.13374/j.issn1001-053x.2004.02.018
Abstract PDF
Fuzzy Adaptive Control Algorithm for Antilock Brake Systems
YAN Yuguang, YU Datai, LI Guo, WU Maosheng, ZHANG Weidong
2004, 26(2): 188-191. DOI: 10.13374/j.issn1001-053x.2004.02.019
Abstract PDF
Architecture of a Distributed Remote Diagnosis System Based on CORBA
WANG Haifeng, XU Jinwu, YANG Debin, YANG Jianhong
2004, 26(2): 192-196. DOI: 10.13374/j.issn1001-053x.2004.02.020
Abstract PDF
Analysis of Mass Flow Parameters for Ironmaking/Steelmaking Interface at Bao Steel
QIU Jian, TIAN Naiyuan, LIU Maolin, SUN Guowei, LU Zhixin
2004, 26(2): 197-201. DOI: 10.13374/j.issn1001-053x.2004.02.021
Abstract PDF
An Incremental Alogrithm for Inducing Decision Trees and Its Complexity
YIN Adong, GONG Yu, WU Shengli, WU Sen, GAO Xuedong, LI Yongjun
2004, 26(2): 202-205. DOI: 10.13374/j.issn1001-053x.2004.02.022
Abstract PDF
Statistical Analysis and Improvement of Process Capability Indices
LIU Jieping, LUO Zhenbi, CHEN Yuliu
2004, 26(2): 206-210. DOI: 10.13374/j.issn1001-053x.2004.02.023
Abstract PDF
Theorems and Computer Simulations on the Generalized Synchronization of Array Dynamical Systems
ZHANG Xiaodan, ZHANG Lili, MIN Lequan
2004, 26(2): 211-214. DOI: 10.13374/j.issn1001-053x.2004.02.024
Abstract PDF
Two Blind Spots in Recent Logic-Based Agent Study Inferred from the Declaration of Logical Omniscience Problem
LI Jinhou, JIANG Jingping
2004, 26(2): 215-218. DOI: 10.13374/j.issn1001-053x.2004.02.025
Abstract PDF
Influence of EPM on the Solidification Structures of 09CuPCrNi Steel Billets
LI Ping, XUE Qingguo, GUAN Yong, WANG Jingsong, TANG Xuefeng, XU Gang, DING Lihua, ZHAO Zhigang
2004, 26(2): 219-221. DOI: 10.13374/j.issn1001-053x.2004.02.026
Abstract PDF
Mathematical Simulation on the PSA Process of a Special Miniature Oxygen Concentrator for SARS Patients: Simulation Results and Analysis
CUI Hongshe, LIU Yingshu, LE Kai, ZHAO Zhi, ZHANG Dexin
2004, 26(2): 222-226. DOI: 10.13374/j.issn1001-053x.2004.02.027
Abstract PDF