column
Grade and reserve calculation in a visual simulation system for geological and mining engineering
LI Cuiping, LI Zhongxue, HAO Xiuqiang, HAO Jinhui
2007, 29(9): 859-862,873. DOI: 10.13374/j.issn1001-053x.2007.09.026
Abstract PDF
Thermal fracture failure characteristic of rock
XIE Weihong, GAO Feng, LI Shuncai
2007, 29(9): 863-868. DOI: 10.13374/j.issn1001-053x.2007.09.045
Abstract PDF
Prediction of composite foundation settlement process based on a modified Poisson-superposition wavelet model
ZHANG Lihua, CAI Meifeng
2007, 29(9): 869-873. DOI: 10.13374/j.issn1001-053x.2007.09.044
Abstract PDF
Porous flow mathematical model of multiphase complex flow with phase change and wax deposition
ZHU Weiyao, JU Yan, YAN Liangdong, WANG Ming, HU Yongle, LUO Kai
2007, 29(9): 874-879. DOI: 10.13374/j.issn1001-053x.2007.09.025
Abstract PDF
Temperature-rising characteristic of chromite ore fines containing coal in a microwave field
CHEN Jin, LI Ning, WANG Shebin, YAN Hong, LIU Jinying
2007, 29(9): 880-883,906. DOI: 10.13374/j.issn1001-053x.2007.09.028
Abstract PDF
Inclusion precipitation in tire cord steel during solidification
WANG Haitao, XU Zhongbo, WANG Fuming
2007, 29(9): 884-889. DOI: 10.13374/j.issn1001-053x.2007.09.029
Abstract PDF
Inclusion quick analysis technique for clean steel
TANG Fuping, CHANG Guihua, LI Hong, CHEN Benwen, LI Guangbang
2007, 29(9): 890-895. DOI: 10.13374/j.issn1001-053x.2007.09.030
Abstract PDF
Influencing factors on center segregation in continuously cast Nb-V-Ti-contained micro-alloying slabs
LIU Yang, WANG Xinhua, ZHANG Kaijun
2007, 29(9): 896-900. DOI: 10.13374/j.issn1001-053x.2007.09.031
Abstract PDF
Effect of deformation on the temper process of lath martensite
XU Shilong, LI Longfei, YANG Wangyue, SUN Zuqing
2007, 29(9): 901-906. DOI: 10.13374/j.issn1001-053x.2007.09.032
Abstract PDF
Effect of soaking time on the dissolution of microalloyed elements in high-strength steel containing Ti and Nb
XUE Rundong, ZHAO Zhiyi, WANG Mingxia, XIE Jianxin
2007, 29(9): 907-910. DOI: 10.13374/j.issn1001-053x.2007.09.033
Abstract PDF
Electrochemical properties of passivation film formed on 316L stainless steel in acetic acid
CHENG Xuequn, LI Xiaogang, DU Cuiwei, YANG Lixia
2007, 29(9): 911-915. DOI: 10.13374/j.issn1001-053x.2007.09.042
Abstract PDF
Precise analysis method for cubic system material texture
YIN Xiandong, YOU Qinglei, JIANG Qiwu, KANG Yonglin
2007, 29(9): 916-919,941. DOI: 10.13374/j.issn1001-053x.2007.09.027
Abstract PDF
Simulation of the rolling texture of pure Al using crystal plasticity finite element method
PI Huachun, HAN Jingtao, ZHANG Chuanguo, A. K. Tieu, JIANG Zhengyi
2007, 29(9): 920-924. DOI: 10.13374/j.issn1001-053x.2007.09.034
Abstract PDF
Synthesis of negative thermal expansion material ZrW2O8 through co-precipitation method
DU Xueli, QU Xuanhui, QIN Mingli, GUO Ruisong
2007, 29(9): 925-927. DOI: 10.13374/j.issn1001-053x.2007.09.035
Abstract PDF
Nonisothermal kinetics of solid-solid phase transitions in C12Mn,C14Mn and their binary system
WU Kezhong, LI Jianling, WANG Xindong, LIU Xiaodi
2007, 29(9): 928-931. DOI: 10.13374/j.issn1001-053x.2007.09.036
Abstract PDF
Mathematical model of burden trajectory in a blast furnace
ZHU Qingtian, CHENG Shusen
2007, 29(9): 932-936. DOI: 10.13374/j.issn1001-053x.2007.09.037
Abstract PDF
Numerical simulation on the effect of swirling nozzles on the temperature field in a continuous casting mold
LU Jinxiong, ZHANG Chen, HU Huijun, CHEN Yanyan, ZHANG Jiongming
2007, 29(9): 937-941. DOI: 10.13374/j.issn1001-053x.2007.09.038
Abstract PDF
Thermal stress and thermal distortion of cast iron cooling stave with surface-alloyed cooling water pipes
SHI Lin, CHENG Susen, FENG Li, SHEN Meng
2007, 29(9): 942-947. DOI: 10.13374/j.issn1001-053x.2007.09.039
Abstract PDF
Three-dimension thermo-mechanical field nonlinear finite element analysis of an aluminum reduction cell
WANG Zewu, MENG Peisheng, ZENG Qing, YI Xiaobing
2007, 29(9): 948-952. DOI: 10.13374/j.issn1001-053x.2007.09.040
Abstract PDF
Accelerated carbonation and leaching behavior of the slag from iron and steel making industry
CHEN Quanyuan, D. C. Johnson, ZHU Lingyun, YUAN Menghong, C. D. Hills
2007, 29(9): 952-952. DOI: 10.13374/j.issn1001-053x.2007.09.041
Abstract PDF
Application of aggregation function in aggregation robust design based on the method of imprecision
FAN Jinzhen, ZHANG Wenming, SHEN Yanhua, ZHAO Xiuting
2007, 29(9): 953-956. DOI: 10.13374/j.issn1001-053x.2007.09.043
Abstract PDF
Chance-constrained goal programming model for capital budgeting problems in fuzzy environment
HUANG Xiaoxia
2007, 29(9): 957-959. DOI: 10.13374/j.issn1001-053x.2007.09.048
Abstract PDF
Analysis of QoS performance for a network dynamic scheduling system
TAO Lihong, HAO Weidong, YANG Yang, LIANG Zhe
2007, 29(9): 960-963. DOI: 10.13374/j.issn1001-053x.2007.09.046
Abstract PDF
Distributed Web usage clustering based on multi-mirror image sites
ZHANG Kejun, YANG Bingru, ZHAO Geng, QU Wenlong
2007, 29(9): 964-970. DOI: 10.13374/j.issn1001-053x.2007.09.047
Abstract PDF