column
Mathematical model and algorithm of a dynamic optimum rescue route during mine fire time based on MapObject
GAO Rui, JIANG Zhongan, DONG Feng, DU Bingshen, GONG Wenbao, WANG Desheng, CHEN Yongxian
2008, 30(7): 705-709,755. DOI: 10.13374/j.issn1001-053x.2008.07.027
Abstract PDF
Anti-slide mechanism of anti-slide piles and engineering application of anchor anti-slide piles
JIN Aibing, GAO Yongtao, SUN Jinhai
2008, 30(7): 710-713. DOI: 10.13374/j.issn1001-053x.2008.07.046
Abstract PDF
Solving the subsurface flow wetland reactor model for sewage treatment
ZHENG Liancun, ZHANG Xinxin, YAN Hai
2008, 30(7): 714-716. DOI: 10.13374/j.issn1001-053x.2008.07.028
Abstract PDF
Saturated vapor pressure measurement of zinc and its chloride from the FeO-CaO-SiO2-Al2O3 slag
ZHANG Yanling, LU Junping, WANG Yugang, GE Xironghui, GUO Xiaodong
2008, 30(7): 717-723. DOI: 10.13374/j.issn1001-053x.2008.07.029
Abstract PDF
Low-temperature toughness characteristics of F40 hull structure steel
WEN Yonghong, TANG Di, WU Huibin, GUO Zhen
2008, 30(7): 724-729. DOI: 10.13374/j.issn1001-053x.2008.07.045
Abstract PDF
Influences of water content on the corrosion behavior of X70 steel in Dagang saline-alkaline soil
CHEN Xu, DU Cuiwei, LI Xiaogang, LIANG Ping, LU Xinru
2008, 30(7): 730-734. DOI: 10.13374/j.issn1001-053x.2008.07.031
Abstract PDF
Influence of chloride ions on the corrosion resistance of X80 pipeline steel in NaHCO_3 solution
LIANG Ping, LI Xiaogang, DU Cuiwei, CHEN Xu, ZHANG Liang
2008, 30(7): 735-739. DOI: 10.13374/j.issn1001-053x.2008.07.032
Abstract PDF
Friction wear behaviors of 316L stainless steel/Y-PSZ composites
GUO Zhenwen, ZHANG Wenquan, LIU Xuefeng, XIE Jianxin
2008, 30(7): 740-745. DOI: 10.13374/j.issn1001-053x.2008.07.033
Abstract PDF
Mechanical properties of glass-coated pure copper micro-wires
HU Zhiyong, HUANG Xia, ZHANG Zhihao, LIU Xuefeng, XIE Jianxin
2008, 30(7): 746-750. DOI: 10.13374/j.issn1001-053x.2008.07.034
Abstract PDF
Microstructurai evolvement rule of extrusions in continuous variable cross-section extrusion
HU Shuiping, GAO Xiaodan, REN Xueping, TANG Di
2008, 30(7): 751-755. DOI: 10.13374/j.issn1001-053x.2008.07.035
Abstract PDF
Microstructure and properties of spray-formed high-strength Al-Zn-Mg-Cu alloy containing manganese
CAI Yuanhua, JI Fei, WANG Mingji, HUANG Jinfeng, DUAN Xianjin, ZHANG Jishan
2008, 30(7): 756-759,774. DOI: 10.13374/j.issn1001-053x.2008.07.036
Abstract PDF
Effect of cooling rate on the segregation and liquid density of Waspaloy alloy during solidification process
ZHONG Boying, WANG Ling, ZHANG Maicang, DONG Jianxin
2008, 30(7): 760-764. DOI: 10.13374/j.issn1001-053x.2008.07.037
Abstract PDF
Room-temperature mechanical properties of the AlxTiVCrMnFeCoNiCu high-entropy alloy system with multi-principal elements
ZHOU Yunjun, ZHANG Yong, WANG Yanli, CHEN Guoliang
2008, 30(7): 765-769. DOI: 10.13374/j.issn1001-053x.2008.07.030
Abstract PDF
Vacuum ultraviolet responded rapid reversible conversion of super-hydrophobicity and super-hydrophilicity of ZnO films
LIU Zhangsong, WANG Ling, LI Zhiwen, XU Zhen, HUANG Jihua
2008, 30(7): 770-774. DOI: 10.13374/j.issn1001-053x.2008.07.043
Abstract PDF
Charge-discharge process of a weak-crystalline manganese dioxide supercapacitor
ZHANG Ying, LIU Kaiyu, ZHANG Wei, DUAN Hao
2008, 30(7): 775-780. DOI: 10.13374/j.issn1001-053x.2008.07.047
Abstract PDF
Unit cell model for micro,nano-porous composite insulation material
WEI Gaosheng, ZHANG Xinxin, YU Fan
2008, 30(7): 781-785. DOI: 10.13374/j.issn1001-053x.2008.07.038
Abstract PDF
Effects of prepared conditions on the photo-alignment behavior of the ladder-like polysiloxane film
CAO Hui, WANG Ying, HUANG Wei, LI Kexuan, XIE Ping, ZHU Siquan, YANG Huai
2008, 30(7): 786-790. DOI: 10.13374/j.issn1001-053x.2008.07.050
Abstract PDF
Catalytic synthesis of butanone 1,2-propanediol ketal by H3PW6Mo6O40/MCM-48
YANG Shuijin, ZHU Peng
2008, 30(7): 791-794. DOI: 10.13374/j.issn1001-053x.2008.07.039
Abstract PDF
Effect of molten steel level on the magnetic field distribution in an electromagnetic soft-contact continuous casting mold
WANG Hongming, REN Zhongming, XIA Xiaojiang, DAI Qixun, LI Guirong
2008, 30(7): 795-799,814. DOI: 10.13374/j.issn1001-053x.2008.07.040
Abstract PDF
Influence of process factors on the characteristic parameters of unstable fluid flow in a continuous thin slab casting mould
SHEN Bingzhen, SHEN Houfa
2008, 30(7): 800-804. DOI: 10.13374/j.issn1001-053x.2008.07.041
Abstract PDF
Development and application of the asymmetry work roll for hot strip mills
HE Anrui, YANG Quan, CHEN Xianlin, DONG Haoran, ZHAO Lin
2008, 30(7): 805-809. DOI: 10.13374/j.issn1001-053x.2008.07.042
Abstract PDF
Design method in the development of large-scale vehicles based on FEM technique
YANG Jue, ZHANG Wenming, SHEN Yanhua
2008, 30(7): 810-814. DOI: 10.13374/j.issn1001-053x.2008.07.044
Abstract PDF
Rotor position self-sensing of a sensorless permanent synchronous motor based on fluctuating high-frequency voltage signal injection and Kalman filter
ZHOU Xiaomin, WANG Zhangsong, ZHONG Liping
2008, 30(7): 815-819. DOI: 10.13374/j.issn1001-053x.2008.07.048
Abstract PDF
Empirical study on the relationship between organizational learning capability and firm performance
MAO Jianjun, WU Dekun, GAO Junshan
2008, 30(7): 820-825,836. DOI: 10.13374/j.issn1001-053x.2008.07.052
Abstract PDF
Decentralized robust stabilization for a class of uncertain composite system with time-varying delay
WU Xiaoxue, LIAO Fucheng
2008, 30(7): 826-831. DOI: 10.13374/j.issn1001-053x.2008.07.051
Abstract PDF
Knowledge discovery based on structural modeling
FAN Yumei, DAN Ping, AI Dongmei, ZHANG Dezheng
2008, 30(7): 832-836. DOI: 10.13374/j.issn1001-053x.2008.07.049
Abstract PDF