column
Slope deformation model of metal mines transferred underground mining from open-pit based on support vector machines
LI Zhang-hong, WANG Yun-fei, CAI Mei-feng, MIAO Sheng-jun, FAN Li-ping
2009, 31(8): 945-950. DOI: 10.13374/j.issn1001-053x.2009.08.001
Abstract PDF
Cohesive dust suppressant used in tailings dams and its environmental adaptability
DU Cui-feng, DU Jian-hua, WANG Ting
2009, 31(8): 951-956. DOI: 10.13374/j.issn1001-053x.2009.08.002
Abstract PDF
Influencing factors analysis of dust mass concentration by transportation in open-pit mines based on orthogonal experiment and multiple regression statistics
TIAN Dong-mei, JIANG Zhong-an, YAO Jian, NIU Wei, ZHENG Bin
2009, 31(8): 957-963. DOI: 10.13374/j.issn1001-053x.2009.08.003
Abstract PDF
Dephosphorization of high-level phosphorus iron ore by gas-based reduction and melt separation
ZHAO Zhi-long, TANG Hui-qing, GUO Zhan-cheng
2009, 31(8): 964-969. DOI: 10.13374/j.issn1001-053x.2009.08.004
Abstract PDF
Dephosphorization technique of converters by multi-functional refining
LI Jian-xin, HAO Xu-dong, CHOU Sheng-tao, ZHAO Pei
2009, 31(8): 970-973. DOI: 10.13374/j.issn1001-053x.2009.08.005
Abstract PDF
Total oxygen prediction model of ultra-low carbon aluminum killed steel in RH treatment and its application
SUN Yan-hui, ZHANG Lin, NI You-jin, XU Zhong-bo, CAI Kai-ke
2009, 31(8): 974-977,1012. DOI: 10.13374/j.issn1001-053x.2009.08.006
Abstract PDF
Dynamic stress-strain behavior of pure iron for shaped charge liners
BAO Wei-ping, REN Xue-ping, JIN Hong-quan
2009, 31(8): 978-982. DOI: 10.13374/j.issn1001-053x.2009.08.007
Abstract PDF
Effect of tempering temperature on the microstructure and mechanical properties of 600 MPa grade low carbon bainitic steel
CHEN Lin-heng, KANG Yong-lin, LI Xian-hao, WEN De-zhi, LIU Guo-min
2009, 31(8): 983-987. DOI: 10.13374/j.issn1001-053x.2009.08.017
Abstract PDF
Microscopic mechanism of XCQ16 and 20Mn2 axle steel fatigue failure
HUANG Zhong-guo, DONG Hong-lei, YUAN Qing-hua, JING Yi-nong, REN Xue-ping
2009, 31(8): 988-994. DOI: 10.13374/j.issn1001-053x.2009.08.018
Abstract PDF
Impact toughness in the welding heat affected zone of HSLA steel with boron
DUAN Gui-sheng, CHEN Wei-qing, SUN Bin
2009, 31(8): 995-1000. DOI: 10.13374/j.issn1001-053x.2009.08.019
Abstract PDF
Hydrogen absorption behavior of TC4 compacts
REN Xue-ping, GUO Qing-miao, HOU Hong-liang, ZHANG Fang-fang
2009, 31(8): 1001-1005. DOI: 10.13374/j.issn1001-053x.2009.08.020
Abstract PDF
Microstructures and phase formation of cast and spray-formed Al-25Si-5Fe-3Cu alloys
HOU Long-gang, CUI Hua, CAI Yuan-hua, ZHANG Ji-shan
2009, 31(8): 1006-1012. DOI: 10.13374/j.issn1001-053x.2009.08.008
Abstract PDF
Fluorescent technology for corrosion prediction of aluminum alloys based on 8-hydroxy-quinoline
WU Song-lin, YU Mei, LI Song-mei, XUE Feng, LIU Jian-hua
2009, 31(8): 1013-1018. DOI: 10.13374/j.issn1001-053x.2009.08.009
Abstract PDF
Preparation of Cu/diamond composites by spark plasma sintering
ZHANG Yu-juan, TONG Zhen-song, SHEN Zhuo-shen
2009, 31(8): 1019-1023. DOI: 10.13374/j.issn1001-053x.2009.08.010
Abstract PDF
Surface modification of up-conversion luminescent materials by glutaraldehyde and its characterization
CUI Li-li, FAN Hui-li, XU Xiao-wei, LIU Jie-min
2009, 31(8): 1024-1027. DOI: 10.13374/j.issn1001-053x.2009.08.011
Abstract PDF
Deposition of Y2O3 thin films by electrostatic spray assisted vapor deposition method
WANG Yao-hua, LÜ Fan-xiu, HE Qi, LI Cheng-ming, TANG Wei-zhong
2009, 31(8): 1028-1032. DOI: 10.13374/j.issn1001-053x.2009.08.016
Abstract PDF
Magnetotunable microwave transmission properties of a magnetoinductive device
XU Fang, BAI Yang, QIAO Li-jie, ZHOU Ji
2009, 31(8): 1033-1037. DOI: 10.13374/j.issn1001-053x.2009.08.021
Abstract PDF
Stability of a micro molten pool for fabricating glass-coated Fe-based alloy microwires
WANG Cheng-duo, ZHANG Zhi-hao, XIE Jian-xin
2009, 31(8): 1038-1045. DOI: 10.13374/j.issn1001-053x.2009.08.012
Abstract PDF
Forming principle of heavy section shrinkage cross wedge rolling by single wedge
JIA Zhen, ZHANG Kang-sheng, YANG Cui-ping, HU Zheng-huan
2009, 31(8): 1046-1050. DOI: 10.13374/j.issn1001-053x.2009.08.013
Abstract PDF
Work roll non-uniform wear and shape control performance of the 2250 hot temper mill in WISCO
YANG Guang-hui, ZHANG Jie, ZHOU Yi-zhong, WANG An-su, ZHU Xin-yu
2009, 31(8): 1051-1056. DOI: 10.13374/j.issn1001-053x.2009.08.014
Abstract PDF
PSA oxygen generating with tandem-type adsorbers
LIU Ying-shu, ZHANG Xin-bo, ZHANG Hui, LIU Wen-hai, CAO Hong-cheng
2009, 31(8): 1057-1060,1076. DOI: 10.13374/j.issn1001-053x.2009.08.015
Abstract PDF
Improved PSO and its application to load distribution optimization of hot strip mills
YAO Feng, YANG Wei-dong, ZHANG Ming
2009, 31(8): 1061-1066. DOI: 10.13374/j.issn1001-053x.2009.08.022
Abstract PDF
Optimal scheduling of steel tube re-entrant lines based on a genetic algorithm
CHEN Xiao-hui, ZHANG Qi-zhong, YI Shu-ping, DUAN Ying, LAI Zhi-zhu
2009, 31(8): 1067-1071. DOI: 10.13374/j.issn1001-053x.2009.08.023
Abstract PDF
A rough-regularized two-cell immune controller
LI Wei, FU Dong-mei
2009, 31(8): 1072-1076. DOI: 10.13374/j.issn1001-053x.2009.08.024
Abstract PDF