column
Numerical simulation of dust concentration distribution regularity in a belt conveyer roadway
JIANG Zhong-an, CHEN Ju-shi, NIU Wei, WANG Jing-jing, CHEN Mei-ling
2012, 34(9): 977-981. DOI: 10.13374/j.issn1001-053x.2012.09.002
Abstract PDF
Improving molybdenum recovery in copper-molybdenum roughing by aerosol flotation technology
XU Tao, SUN Chun-bao, MI Li-ping, YAN Zhi-qiang, LUO Sheng-kang
2012, 34(9): 982-986. DOI: 10.13374/j.issn1001-053x.2012.09.003
Abstract PDF
Fluidizing reduction roasting of low grade pyrolusite
WANG Ji-xue, FENG Ya-li, LI Hao-ran
2012, 34(9): 987-991. DOI: 10.13374/j.issn1001-053x.2012.09.013
Abstract PDF
Influence of diatomite calcination temperature on the purification of coking wastewater
GU Qi-yuan, WU Gen, SONG Cun-yi, LI Guo-ting, ZHAO Wei-gao
2012, 34(9): 992-997. DOI: 10.13374/j.issn1001-053x.2012.09.001
Abstract PDF
Preparation and properties of biomass char for ironmaking
HU Zheng-wen, ZHANG Jian-liang, ZUO Hai-bin, LI Jing, LIU Zheng-jian, YANG Tian-jun
2012, 34(9): 998-1005. DOI: 10.13374/j.issn1001-053x.2012.09.014
Abstract PDF
Grain growth and its control method of intermediate slabs for plates during cooling processes
YU Wei, ZHANG Zhi-min, LIU Tao, CAI Qing-wu
2012, 34(9): 1006-1010. DOI: 10.13374/j.issn1001-053x.2012.09.004
Abstract PDF
Solidification regularity of a bloom during continuous casting
XIAO Chao, ZHANG Jiong-ming, LUO Yan-zhao, HU Zhao-fan
2012, 34(9): 1011-1016. DOI: 10.13374/j.issn1001-053x.2012.09.015
Abstract PDF
Laboratory studies on the coiling temperature of ultra-low carbon deep drawing steel
QU Xiao, PENG Wei, XU Xiao-chang, PEI Fei
2012, 34(9): 1017-1022. DOI: 10.13374/j.issn1001-053x.2012.09.005
Abstract PDF
Phase composition of controlled rolling and cooling TRIP steel and its relationship with mechanical properties
MI Zhen-li, CHEN Mei-fang, LI Zhi-chao, JIANG Hai-tao, ZHANG Ming-ming
2012, 34(9): 1023-1027. DOI: 10.13374/j.issn1001-053x.2012.09.006
Abstract PDF
Microstructure and mechanical properties of Q125 grade high-strength oil well casing steel used for electric resistance welding
WANG Li-dong, TANG Di, WU Hui-bin, MA Mao-yuan
2012, 34(9): 1028-1035. DOI: 10.13374/j.issn1001-053x.2012.09.007
Abstract PDF
Preparation and properties of nickel-free stainless steel 17Cr10Mn2MoN
ZHONG Hai-lin, LI Xiao-ming, XIN Dong-mei, KUANG Chun-jiang
2012, 34(9): 1036-1040. DOI: 10.13374/j.issn1001-053x.2012.09.016
Abstract PDF
Flow behaviors of 6005A and 6082 aluminum alloys during hot deformation
DING Xian-fei, ZHANG Li-xin, SUN Dong-bo, WANG Zhi-hai, WANG Li-chen, LI Heng-kui
2012, 34(9): 1041-1047. DOI: 10.13374/j.issn1001-053x.2012.09.008
Abstract PDF
Microstructure and interfacial configuration of AZ31 magnesium alloy ingots clad by 1060 aluminium
LI Fang-ping, YU Wen-bin, JIANG Xian-quan, YANG Qing-shan
2012, 34(9): 1048-1053. DOI: 10.13374/j.issn1001-053x.2012.09.009
Abstract PDF
Electrochemical performance and corrosion resistance of Zn-Ai pseudo-alloy coatings in chlorine ion-containing environment
LIU An-qiang, XIAO Kui, DONG Chao-fang, LI Xiao-gang, WEI Dan
2012, 34(9): 1054-1060. DOI: 10.13374/j.issn1001-053x.2012.09.010
Abstract PDF
Estimating the burden surface profile of a blast furnace based on multi-radar measurement and least squares approximations
ZHU Qiao, CHENG Han-qing, YIN Yi-xin, CHEN Xian-zhong
2012, 34(9): 1061-1064. DOI: 10.13374/j.issn1001-053x.2012.09.017
Abstract PDF
Local mass transfer and mixing effect of converters
XU Dong, CANG Da-qiang, QIN Li-xue, DUAN Jian-feng
2012, 34(9): 1065-1071. DOI: 10.13374/j.issn1001-053x.2012.09.018
Abstract PDF
Development of a system for fast measuring hydrogen content in aluminum alloy melt based on dynamic measurement of hydrogen partial pressure
SUN Qian, LI Da-yong, WANG Li-hua
2012, 34(9): 1072-1076. DOI: 10.13374/j.issn1001-053x.2012.09.020
Abstract PDF
Design of asymmetric work rolls in hot strip mills based on multi-criterion satisfactory optimization
SHAO Jian, TANG Di, HE An-rui, YANG Quan, SHI Nai-an
2012, 34(9): 1077-1083. DOI: 10.13374/j.issn1001-053x.2012.09.011
Abstract PDF
Computational method of continuous casting heats for the 304 stainless steel smelting flow in EAF by considering transport energy
FENG Kai, XU An-jun, WANG Hong-bing, TIAN Nai-yuan
2012, 34(9): 1084-1090. DOI: 10.13374/j.issn1001-053x.2012.09.019
Abstract PDF
Hybrid direct hot charge rolling production for specific reheating furnace mode
XU An-jun, LU Yong-ming, DAN Duo, TIAN Nai-yuan, HE Dong-feng
2012, 34(9): 1091-1096. DOI: 10.13374/j.issn1001-053x.2012.09.012
Abstract PDF