column
Relationship between the size of inclusions in steel and total oxygen(T.O)
WANG Min, BAO Yan-ping, ZHAO Li-hua, LIN Lu, YANG Quan
2015, 37(S1): 1-5. DOI: 10.13374/j.issn2095-9389.2015.s1.001
Abstract PDF
Flatness pattern recognition of ultra-wide tandem cold rolling mill
BAO Ren-ren, ZHANG Jie, LI Hong-bo, JIA Sheng-hui, LIU Hai-jun, XIAO Sheng
2015, 37(S1): 6-11. DOI: 10.13374/j.issn2095-9389.2015.s1.002
Abstract PDF
Stress nondestructive testing of strip steel based on transmissive magnetoelastic effect
CENG Jie-wei, ZHANG Qing-dong, MOU Cun-xiao, SU Lan-hai, BI Jia
2015, 37(S1): 12-17. DOI: 10.13374/j.issn2095-9389.2015.s1.003
Abstract PDF
On-linesurface defect detection for steel rails based on multi-line lasers
ZHOU Peng, XU Ke, ZHANG Chun-yang, YANG Chao-lin
2015, 37(S1): 18-23. DOI: 10.13374/j.issn2095-9389.2015.s1.004
Abstract PDF
Effect of the geometric parameters of elastomer substrates on the flexibility of stretchable electronics
WANG Xiao-ling, LI Hao, WANG Guo-qing
2015, 37(S1): 24-28. DOI: 10.13374/j.issn2095-9389.2015.s1.005
Abstract PDF
Numerical simulation of internal flow field for post-mixed abrasive water jet descaling nozzle
LIU Guo-yong, WANG Kuan-kuan, CHEN Xin-xin, DONG Li-ming, ZHU Dong-mei, ZHANG Shao-jun
2015, 37(S1): 29-34. DOI: 10.13374/j.issn2095-9389.2015.s1.006
Abstract PDF
Study on the quantitative relationship between total oxygen content and non-metallic inclusion in steel with ASPEX SEM
YU Hui-xiang, SHAO Xiao-jing, ZHANG Jing, WANG Xin-hua
2015, 37(S1): 35-44. DOI: 10.13374/j.issn2095-9389.2015.s1.007
Abstract PDF
Cause analysis of head width narrow of hot rolled strip based on feature selection of information entropy
HE Fei, XIAO Hui-fang
2015, 37(S1): 45-50. DOI: 10.13374/j.issn2095-9389.2015.s1.008
Abstract PDF
Inhomogeneity of cold-rolled texture in low-carbon steel sheets
ZHENG Pan-pan, CHEN Leng
2015, 37(S1): 51-55. DOI: 10.13374/j.issn2095-9389.2015.s1.009
Abstract PDF
Quality analysis method for hot strip based on data mining
LI Yang, WANG Jing, ZHANG Yong-jun
2015, 37(S1): 56-64. DOI: 10.13374/j.issn2095-9389.2015.s1.010
Abstract PDF
Fault diagnosis of rolling element bearing based on ensemble empirical mode decomposition and cross energy operator
ZHAO Xiao-ning, FENG Zhi-peng
2015, 37(S1): 65-71. DOI: 10.13374/j.issn2095-9389.2015.s1.011
Abstract PDF
Fault diagnosis of ball bearing based on EEMD morphological spectrum and support vector machine
JIANG Wan-lu, ZHENG Zhi, HU Hao-song
2015, 37(S1): 72-77. DOI: 10.13374/j.issn2095-9389.2015.s1.012
Abstract PDF
Chatter analysis about roll grinder of twenty-high rolling mill in grinding process with grinding wheel dynamic imbalance fault
WANG Li-ming, YUAN Yi-lin, SHAO Yi-min, WANG Sheng-jun
2015, 37(S1): 78-83. DOI: 10.13374/j.issn2095-9389.2015.s1.013
Abstract PDF
Torsion vibration model and vibration character analysis of rolling skid based on the twenty-high rolling mill
WU Sheng-li, SHAO Yi-min, YUAN Yi-lin
2015, 37(S1): 84-89. DOI: 10.13374/j.issn2095-9389.2015.s1.014
Abstract PDF
Analysis on the uniformity of coatings of color-coated sheet
ZHU Dong-mei, DONG Li-ming, LIU Guo-yong, WANG Kuan-kuan, WANG Lei, ZHANG Shao-jun
2015, 37(S1): 90-97. DOI: 10.13374/j.issn2095-9389.2015.s1.015
Abstract PDF
Research on oscillation of neutral angle in deformation zone caused by vertical-torsional coupling vibration for tandem mill
ZHANG Yi-fang, YAN Xiao-qiang, LING Qi-hui
2015, 37(S1): 98-102. DOI: 10.13374/j.issn2095-9389.2015.s1.016
Abstract PDF
Analysis and optimization of aluminum strip during flattening process of 2450 cold rolling mill
LIANG Meng, YANG Hai-bo
2015, 37(S1): 103-107. DOI: 10.13374/j.issn2095-9389.2015.s1.017
Abstract PDF
Research on real-time abnormal voltage detection and prediction method based on the linear tracking differentiator
XIAO Xiong, ZHANG Yong-jun, WANG Jing, SU Hong-yue
2015, 37(S1): 108-115. DOI: 10.13374/j.issn2095-9389.2015.s1.018
Abstract PDF
Research on instability model in main drive of rolling mill based on LADRC
ZHANG Yong-kang, ZHANG Yong-jun, MA Run-min
2015, 37(S1): 116-119. DOI: 10.13374/j.issn2095-9389.2015.s1.019
Abstract PDF