LI Shi-na, MA Rui-xin, MA Chun-hong, HUANG Kai, NIU Jian-wen, ZHU Hong-min. Preparation of basic CuInSe2 nanoparticles in the solution system of Cu+-In3+-Se2--NH3-L2--Cl--H2O[J]. Chinese Journal of Engineering, 2015, 37(8): 1036-1043. DOI: 10.13374/j.issn2095-9389.2015.08.010
Citation: LI Shi-na, MA Rui-xin, MA Chun-hong, HUANG Kai, NIU Jian-wen, ZHU Hong-min. Preparation of basic CuInSe2 nanoparticles in the solution system of Cu+-In3+-Se2--NH3-L2--Cl--H2O[J]. Chinese Journal of Engineering, 2015, 37(8): 1036-1043. DOI: 10.13374/j.issn2095-9389.2015.08.010

Preparation of basic CuInSe2 nanoparticles in the solution system of Cu+-In3+-Se2--NH3-L2--Cl--H2O

  • According to the principles of simultaneous equilibria and mass equilibria, CuInSe2 (CIS) were prepared by total aqueous process at normal pressure and room temperature. A series of thermodynamic equilibrium equations were deduced for the complex system of Cu+-In3+-Se2--NH3-L2--Cl--H2O (T=298 K), and the equilibrium curves of lgc-pH were drawn. It was found from these equilibrium diagrams thatNH3T primarily affected theCu+T concentration,L2-T influenced theIn3+T concentration, andCl-T had impact on both. The highest precipitation coefficient was obtained at pH 7.0-8.5. As a result, based on the principles of simultaneous equilibria and mass equilibria of the Cu+-In3+-Se2--NH3-L2--Cl--H2O system (T=298 K) and used total aqueous process at normal pressure and room temperature, CIS nanoparticles can be synthesized by adjusting the pH value to 7.0-8.5, and their size is about 20 to 50 nm.
  • loading

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return