• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

镍基喷焊层的等离子弧重熔试验研究

严密

严密. 镍基喷焊层的等离子弧重熔试验研究[J]. 工程科学学报, 1996, 18(S2): 32-36. DOI: 10.13374/j.issn1001-053x.1996.s2.007
引用本文: 严密. 镍基喷焊层的等离子弧重熔试验研究[J]. 工程科学学报, 1996, 18(S2): 32-36. DOI: 10.13374/j.issn1001-053x.1996.s2.007
Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. DOI: 10.13374/j.issn1001-053x.1996.s2.007
Citation: Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. DOI: 10.13374/j.issn1001-053x.1996.s2.007

镍基喷焊层的等离子弧重熔试验研究

基金项目: 

国家自然科学基金及冶金部腐蚀-磨石与表面技术开放研究实验室资助

详细信息
    作者简介:

    严密 男 教授

  • 分类号: TG456.2

Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding

  • 摘要: 以等离子弧为热源,采用类似激光表面改性的办法,研究了重熔处理对Ni基自熔合金组织和耐磨性的影响。经等离子弧扫描重熔,喷焊层表面形成重熔激冷层,该层基体组织由γ-Ni转变为化合物Cr0.7Fe0.36Ni2.90,并形成晶粒度很小的微晶组织。重熔后试样的耐磨粒磨损与粘着磨损性能提高,且880W重熔较440W重熔试样的耐磨粒磨损性能提高程度更大。
    Abstract: The effect of plasma arc remelting treatment on the microstructure and wear resistance of overlay is investigated and discussed.With plasma are remelting process, a remelting-chilling layer formed on the overlay surface.In the layer,the matrix structure transormed from γ-Ni to Cr0.7Fe0.36Ni2.90,and fine crystallite grains were obtained. Both abrasive and adhesive wear resistance were maised by plasma the remelting process.
计量
  • 文章访问数:  346
  • HTML全文浏览量:  87
  • PDF下载量:  13
  • 被引次数: 0
出版历程
  • 收稿日期:  1996-01-21
  • 网络出版日期:  2021-11-12

目录

    /

    返回文章
    返回