阎群, 孙昌国, 林文兴, 余达太, 马振平, 李宇. 数控旋压图形编程系统中渐开线道次规划[J]. 工程科学学报, 2002, 24(3): 357-359. DOI: 10.13374/j.issn1001-053x.2002.03.076
引用本文: 阎群, 孙昌国, 林文兴, 余达太, 马振平, 李宇. 数控旋压图形编程系统中渐开线道次规划[J]. 工程科学学报, 2002, 24(3): 357-359. DOI: 10.13374/j.issn1001-053x.2002.03.076
shu
YAN Qun, SUN Changguo, LIN Wenxing, YU Datai, MA Zhenping, LI Yu. Designing Involute Roller Path in Numeral Control(NC) Spinning Machine Graphic Programming System[J]. Chinese Journal of Engineering, 2002, 24(3): 357-359. DOI: 10.13374/j.issn1001-053x.2002.03.076
Citation: YAN Qun, SUN Changguo, LIN Wenxing, YU Datai, MA Zhenping, LI Yu. Designing Involute Roller Path in Numeral Control(NC) Spinning Machine Graphic Programming System[J]. Chinese Journal of Engineering, 2002, 24(3): 357-359. DOI: 10.13374/j.issn1001-053x.2002.03.076
shu

数控旋压图形编程系统中渐开线道次规划

Designing Involute Roller Path in Numeral Control(NC) Spinning Machine Graphic Programming System

    摘要
  • 摘要: 介绍了旋压加工中渐开线道次规划的基本原理,讨论了具体实现渐开线道次图形编程的主要问题,并在Windows环境下,采用面向对象的程序设计语言VisualC++6.0实现了渐开线道次图形编程.

     

    Abstract: The principle of designing involute roller-path is presented. The fundamental problem, which must be resolved in accomplishing the graphic programming of designing involute roller-path, is discussed. Under Windows, using Microsoft Visual C++ programming language, the automatic designing involute roller-path in the graphic programming system of NC spinning machine is materialized.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回