王枨, 洪伟. 复合型疲劳的一些实验特性[J]. 工程科学学报, 1985, 7(4): 107-111. DOI: 10.13374/j.issn1001-053x.1985.04.013
引用本文: 王枨, 洪伟. 复合型疲劳的一些实验特性[J]. 工程科学学报, 1985, 7(4): 107-111. DOI: 10.13374/j.issn1001-053x.1985.04.013
Wang Cheng, Hong Wei. SOME EXPERIMENTAL CHARATERISTICS OF COMPLEX FATIGUE[J]. Chinese Journal of Engineering, 1985, 7(4): 107-111. DOI: 10.13374/j.issn1001-053x.1985.04.013
Citation: Wang Cheng, Hong Wei. SOME EXPERIMENTAL CHARATERISTICS OF COMPLEX FATIGUE[J]. Chinese Journal of Engineering, 1985, 7(4): 107-111. DOI: 10.13374/j.issn1001-053x.1985.04.013

复合型疲劳的一些实验特性

SOME EXPERIMENTAL CHARATERISTICS OF COMPLEX FATIGUE

  • 摘要: 本文提出:复合型疲劳的开裂角与一次断裂的开裂角有性质上的不同,而个仅在表面上,尤其是有些裂纹状态,当K11=0时(即纯Ⅰ型),疲劳裂纹并不沿着原裂纹方向扩展;相反地,有些裂纹状态,当K11≠0时(即复合型),疲劳裂纹却沿着原裂纹方向扩展。其次是复合型的裂纹扩展速率da/dN与纯Ⅰ型的da/dN,其规律性也不一致。

     

    Abstract: In this paper, we presented that the obvious differences between the fracture angle of the complex fatigue crak and that of the brittle fracture crack are not only superficial but also substantive,especially in some particular crack states,for instance, some fatigue cracks don’t propagate along the direction of their original cracks in the condition of pure type I (K11=0).On the contrary, they do so in the condition of complex type (K11≠0). Besides, the growth rates da/dN of the crack between complex fatigue and pure type I fatigue have different regularities. It appeared that their criterions shoudn’t be identical.

     

/

返回文章
返回