洪彦若, 钟伟珍. 浇注法制作Caβ″—Al2O3陶瓷管[J]. 工程科学学报, 1987, 9(2): 73-77. DOI: 10.13374/j.issn1001-053x.1987.02.011
引用本文: 洪彦若, 钟伟珍. 浇注法制作Caβ″—Al2O3陶瓷管[J]. 工程科学学报, 1987, 9(2): 73-77. DOI: 10.13374/j.issn1001-053x.1987.02.011
Hong Yanruo, Zhong Weizhen. Fabrication on Polycrystalline Caβ″-Al2O3 Tube[J]. Chinese Journal of Engineering, 1987, 9(2): 73-77. DOI: 10.13374/j.issn1001-053x.1987.02.011
Citation: Hong Yanruo, Zhong Weizhen. Fabrication on Polycrystalline Caβ″-Al2O3 Tube[J]. Chinese Journal of Engineering, 1987, 9(2): 73-77. DOI: 10.13374/j.issn1001-053x.1987.02.011

浇注法制作Caβ″—Al2O3陶瓷管

Fabrication on Polycrystalline Caβ″-Al2O3 Tube

  • 摘要: 本文介绍了首次制成Caβ″—Al2O3陶瓷管的方法—粉末注模浇注法的工艺流程以及介质、粉末粒度、温度等因素对陶瓷管质量的影响。同时给出了陶瓷管的密度,利用伽伐电池测得的电化学性能以及用电化学方法测得的CaO在此电解质中的活度,为Caβ″-Al2O3陶瓷管的实际应用提供了基本数据。

     

    Abstract: Caβ"-Al2O3 is a fast ion conductor of divalent cation conducting. It can be used to determine the activity of CaO in slag directly and be made a probe for determining the low oxygen in iron. The fabrication of Polycrystalline Caβ"-Al2O3 ceramic tube by slip casting are introduced and the effect of medium,Powder size and temperature on the quality of the tube are described too. For the slip casting, methanolic slips and powder molds were used. The high density (97% theoretical density) and heavy textured fired tubes were obtained after sintering for 2 hours at 1670℃.
    For checking the electrochemical properties of Caβ"-Al2O3 a Galvanic cell to determine the high temperature thermodynamic properties of the. La-O-F system was constructed in this work.
    The activities of calcia in. Caβ"-Al2O3 at 1113-1333 K were measured by the following cell
    Pt|CeO2 (s), CeF3 (s),CaF2 (s), CaO (β") CSZ|O2 (air)|Pt.

     

/

返回文章
返回