沈定钊, 吴春京, 邹乐平. 铁水中喷吹MoO3直接还原及合金化[J]. 工程科学学报, 1988, 10(1): 7-11. DOI: 10.13374/j.issn1001-053x.1988.01.002
引用本文: 沈定钊, 吴春京, 邹乐平. 铁水中喷吹MoO3直接还原及合金化[J]. 工程科学学报, 1988, 10(1): 7-11. DOI: 10.13374/j.issn1001-053x.1988.01.002
shu
Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO3 into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. DOI: 10.13374/j.issn1001-053x.1988.01.002
Citation: Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO3 into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. DOI: 10.13374/j.issn1001-053x.1988.01.002
shu

铁水中喷吹MoO3直接还原及合金化

On Direct Reducing and Alloying by the Method of Injecting MoO3 into Melt Iron

    摘要
  • 摘要: 本文讨论了在铁水中铝被直接还原的可能性;比较了喷吹法和团块法的处理效果;研究了钼对铁水的合金化作用。发现在1300-1550即1550℃温度范围内,在工业铁水中钼的直接还原和合金化可以同时完成。喷吹法比其它加入法能得到较好的效果。如这种新技术应用在工业上,可获得显著的经济效益。

     

    Abstract: This paper discussed the posibility of reduction of molybdenum directly in melt iron, compared the effect of treated method of injection with briquette; made experimental rcsearchs on the effect of alloying for molybdenum on melt iron. It has been found that direct reduction of molybdenum and alloying may be completed simultaneously in industrial melt iron when the temperature is 1300~1550℃.Generally speaking, the injecting method may get better effect than another one.The economical profit will be remarkable when this new technique is successfuly used in the industry.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回