秦民生, 吴胜利, 熊小星, 王朝正. 高炉冶炼硅锰合金试验[J]. 工程科学学报, 1988, 10(2): 135-141. DOI: 10.13374/j.issn1001-053x.1988.02.021
引用本文: 秦民生, 吴胜利, 熊小星, 王朝正. 高炉冶炼硅锰合金试验[J]. 工程科学学报, 1988, 10(2): 135-141. DOI: 10.13374/j.issn1001-053x.1988.02.021
Qin Minsheng, Wu Shengli, Xiong Xiaoxing, Wang Chaozheng. Smelting Si-Mn Ferro-Alloy in Blast Furnace[J]. Chinese Journal of Engineering, 1988, 10(2): 135-141. DOI: 10.13374/j.issn1001-053x.1988.02.021
Citation: Qin Minsheng, Wu Shengli, Xiong Xiaoxing, Wang Chaozheng. Smelting Si-Mn Ferro-Alloy in Blast Furnace[J]. Chinese Journal of Engineering, 1988, 10(2): 135-141. DOI: 10.13374/j.issn1001-053x.1988.02.021

高炉冶炼硅锰合金试验

Smelting Si-Mn Ferro-Alloy in Blast Furnace

  • 摘要: 高炉法辅助电炉因地制宜地生产硅锰铁合金,可以充分利用我国贫锰矿资源,并有可能提供一个新的高炉铁合金品种。
    在理论分析的基础上,在一座36m3的小高炉上进行了工业冶炼试验。试验表明:在高炉上用富氧鼓风冶炼含Si=12-14%的硅锰铁合金,在技术上是成功的,在我国条件下,经济上也是有益的。

     

    Abstract: Smelting to local condition can be used for full application of chine-se poor manganous ore, and this process probably provides a new variety of B.F ferro-alloy.
    This industrial experiment was based on therotical investigation and carried out with a small B. F. of 36m3. The test shows that the smelting Si-Mn ferro-alloy of 12-14% Si content in blast furnace with oxygen enriched blast is success technically and beneficial economically in Chinese condition.

     

/

返回文章
返回