卢燕平, 吴继勋, 叶志远. 钢板电镀锌-铁合金工艺及镀层性能[J]. 工程科学学报, 1988, 10(2): 241-247. DOI: 10.13374/j.issn1001-053x.1988.02.035
引用本文: 卢燕平, 吴继勋, 叶志远. 钢板电镀锌-铁合金工艺及镀层性能[J]. 工程科学学报, 1988, 10(2): 241-247. DOI: 10.13374/j.issn1001-053x.1988.02.035
shu
Lu Yanping, Wu Jixun, Ye Zhiyuan. The Process of Electroplating Zinc-Iron Alloy on Steel Sheet and Performace of Coating[J]. Chinese Journal of Engineering, 1988, 10(2): 241-247. DOI: 10.13374/j.issn1001-053x.1988.02.035
Citation: Lu Yanping, Wu Jixun, Ye Zhiyuan. The Process of Electroplating Zinc-Iron Alloy on Steel Sheet and Performace of Coating[J]. Chinese Journal of Engineering, 1988, 10(2): 241-247. DOI: 10.13374/j.issn1001-053x.1988.02.035
shu

钢板电镀锌-铁合金工艺及镀层性能

The Process of Electroplating Zinc-Iron Alloy on Steel Sheet and Performace of Coating

    摘要
  • 摘要: 本文讨论了钢板电镀锌-铁合金工艺,并对锌-铁合金镀层的显微结构、相成分、表面形貌、显微硬度、结合力、稳定电位和耐蚀性进行了研究。结果表明:用电镀法可以获得一种高质量的含铁为16~17%的锌铁合金镀层。

     

    Abstract: A high-grade Zn-Fe alloy coating containing 16-17 wt% Fe can be obtained by electroplating in the plating solution consisting of sulfate solution. The micrograph of this coating has found η phase, δ1 phase, Y phase and a phase.Hm=803.6-891.8MPa.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回