王邦文, 王士宏. Y型轧机的孔型设计与力能参数[J]. 工程科学学报, 1989, 11(1): 44-51. DOI: 10.13374/j.issn1001-053x.1989.01.009
引用本文: 王邦文, 王士宏. Y型轧机的孔型设计与力能参数[J]. 工程科学学报, 1989, 11(1): 44-51. DOI: 10.13374/j.issn1001-053x.1989.01.009
shu
Wang Bangwen, Wang Shihong. The Pass Designs and Parameters to Rolling Force and Touque for 3-Roll Stands[J]. Chinese Journal of Engineering, 1989, 11(1): 44-51. DOI: 10.13374/j.issn1001-053x.1989.01.009
Citation: Wang Bangwen, Wang Shihong. The Pass Designs and Parameters to Rolling Force and Touque for 3-Roll Stands[J]. Chinese Journal of Engineering, 1989, 11(1): 44-51. DOI: 10.13374/j.issn1001-053x.1989.01.009
shu

Y型轧机的孔型设计与力能参数

The Pass Designs and Parameters to Rolling Force and Touque for 3-Roll Stands

    摘要
  • 摘要: 本文根据3辊Y型轧机的工艺特点,通过几何关系,推导出适用于3辊Y型轧机的孔型设计公式和力能参数计算公式。

     

    Abstract: As of the characters of 3-roll stand, and through relation of geometry, applied formula of the pass designs and parameters of oiling force and touque for 3-roll stands are deriven.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回