史小路. 自动径缩卷筒径向压力计算[J]. 工程科学学报, 1991, 13(1): 83-88. DOI: 10.13374/j.issn1001-053x.1991.01.039
引用本文: 史小路. 自动径缩卷筒径向压力计算[J]. 工程科学学报, 1991, 13(1): 83-88. DOI: 10.13374/j.issn1001-053x.1991.01.039
Shi Xiaolu. The Calculation of Radial Pressure on Controlled Mandrel[J]. Chinese Journal of Engineering, 1991, 13(1): 83-88. DOI: 10.13374/j.issn1001-053x.1991.01.039
Citation: Shi Xiaolu. The Calculation of Radial Pressure on Controlled Mandrel[J]. Chinese Journal of Engineering, 1991, 13(1): 83-88. DOI: 10.13374/j.issn1001-053x.1991.01.039

自动径缩卷筒径向压力计算

The Calculation of Radial Pressure on Controlled Mandrel

  • 摘要: 利用弹性理论的经典解,结合卷筒自动径缩发生前后不同的力学条件,得出了自动径缩卷筒径向压力的计算方法。为便于应用,还给出了径向压力计算曲线;其计算结果与实测值对比取得了较好的一致性。

     

    Abstract: Using axisymmetric theory of plane problem in elasticity and considering, the influence of controlled collapse, a new calculating method is developed, in which the radial stress and the coil hoop stress are studied together. Some curves have been made and by which the radial pressure can be calculated easily. The calculated results are similar to that measured in experiment.

     

/

返回文章
返回