楔横轧轧制瞬时转速的计算机测量和轧制半径的确定

Computer Measuring of Rolling Rotating Speed and Rolling Radium in Wedge Cross Rolling

摘要: 介绍了用APPLE-Ⅱ微型计算机和光栅脉冲发生器测量楔横轧轧制转速和确定轧制半径的普遍方法,并指出在条件许可的情况下,只要尽量选用高码道的脉冲发生器就可以提高测量精度。且以某锥体零件毛坯轧制的轧制转速和轧制半径测量为例,证明了这一方法是可行的。

Abstract: This paper introduces a new way that can measure the speed of wedge cross rolling and rolling radium with Apple-Ⅱ computer. It says, the precision of measure can be increased if the precision of equipment is enough. The way is proved to be excellent by measuring the rotating speed and rolling radium of some semifinished spare part as an example.