林均品, 安希㟾, 雷廷权. 铝合金动态再结晶模型[J]. 工程科学学报, 1993, 15(3): 262-266. DOI: 10.13374/j.issn1001-053x.1993.03.022
引用本文: 林均品, 安希㟾, 雷廷权. 铝合金动态再结晶模型[J]. 工程科学学报, 1993, 15(3): 262-266. DOI: 10.13374/j.issn1001-053x.1993.03.022
shu
Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. DOI: 10.13374/j.issn1001-053x.1993.03.022
Citation: Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. DOI: 10.13374/j.issn1001-053x.1993.03.022
shu

铝合金动态再结晶模型

A Dynamic Recrystallization Model of Al-alloys

    摘要
  • 摘要: 本文提出了一个材料性质参数Kmax,用该参数可把铝合金分为两类:在Kmax<0.1的铝合金中只能发生连续动态再结晶,并且不能进行完全;在Kmax>0.1的铝合金中只能发生不连续动态再结晶。本文还讨论了热形变铝合金亚组织的特点。

     

    Abstract: A parameter Kmax indicating the nature of the materials has been suggested by present work with which the Al-alloys can be classified into two categories:in alloys with Kmax<0.1 only continuous dynamic recrystallization can occur and it cannot proceed completely; in alloys with Kmax>0.1 occurs only dynamic recrystallization. The characteristics of the dynamic recrystallization of Al-alloys has been discussed.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回