李连诗, 杨效平. 内螺旋凸筋管的内模沟槽曲线理论解[J]. 工程科学学报, 1994, 16(1): 43-46. DOI: 10.13374/j.issn1001-053x.1994.01.010
引用本文: 李连诗, 杨效平. 内螺旋凸筋管的内模沟槽曲线理论解[J]. 工程科学学报, 1994, 16(1): 43-46. DOI: 10.13374/j.issn1001-053x.1994.01.010
shu
Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. DOI: 10.13374/j.issn1001-053x.1994.01.010
Citation: Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. DOI: 10.13374/j.issn1001-053x.1994.01.010
shu

内螺旋凸筋管的内模沟槽曲线理论解

Theoretical Solution of Groove Curve on Plug of Rifled Tubes

    摘要
  • 摘要: 通过理论分析,建立了拔制内凸筋管的内模沟槽曲线.经过工厂试用,获得了按国际标准交货的产品,包括几何尺寸精度和力学性能.

     

    Abstract: The key technology for producing rifled tubes is designing the shape of plug.It is diffcult to produce high quality rifled tubes by using of the straight line instead of the plug curve.Through analysis of theory,a theoretical formula is set up and achieve satisfied result through factory try out.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回