喷射成形过程中雾化锥体的温度场与质量场

吴成义; 张丽英; 殷皓; 吴庆文

doi:10.13374/j.issn1001-053x.1994.02.009

吴成义, 张丽英, 殷皓, 吴庆文. 喷射成形过程中雾化锥体的温度场与质量场[J]. 工程科学学报, 1994, 16(2): 139-143. DOI: 10.13374/j.issn1001-053x.1994.02.009

引用本文:

吴成义, 张丽英, 殷皓, 吴庆文. 喷射成形过程中雾化锥体的温度场与质量场[J]. 工程科学学报, 1994, 16(2): 139-143. DOI: 10.13374/j.issn1001-053x.1994.02.009

Wu Chengyi, Zhang Liying, Yin Hao, Wu Qingwen. Temperature and Mass Field of the Atomization Cone during Spray Forming[J]. Chinese Journal of Engineering, 1994, 16(2): 139-143. DOI: 10.13374/j.issn1001-053x.1994.02.009

Citation:

Wu Chengyi, Zhang Liying, Yin Hao, Wu Qingwen. Temperature and Mass Field of the Atomization Cone during Spray Forming[J]. Chinese Journal of Engineering, 1994, 16(2): 139-143. DOI: 10.13374/j.issn1001-053x.1994.02.009

喷射成形过程中雾化锥体的温度场与质量场

Temperature and Mass Field of the Atomization Cone during Spray Forming

摘要

摘要: 本文着重研究了喷射成形过程中雾化锥体的温度场与质量场的测定方法.进一步测定了纯铝及ZQSn6-6-3青铜的温度场和质量场,并讨论了其特征.

Abstract: Special emphasis of this paper is laid on the measure methods of the temperature field and the mass field of the atomization cone during the spray forming. The temperature field and the mass field of pure aluminum and 6-6-3 copper alloy were measured.The charcteristics of these fields are discussed.

HTML全文

参考文献(0)

资源附件(0)

/