吴成义, 张丽英, 殷浩, 李晓军, 魏彩虹. 喷射成形高速钢显微结构和性能[J]. 工程科学学报, 1994, 16(5): 409-413. DOI: 10.13374/j.issn1001-053x.1994.05.002
引用本文: 吴成义, 张丽英, 殷浩, 李晓军, 魏彩虹. 喷射成形高速钢显微结构和性能[J]. 工程科学学报, 1994, 16(5): 409-413. DOI: 10.13374/j.issn1001-053x.1994.05.002
shu
Wu Chengyi, Zhang Liying, Yin Hao, Li Xiaojun, Wei Caihong. Study of Microstructure and Properties of High Speed Steel Produced by Spray[J]. Chinese Journal of Engineering, 1994, 16(5): 409-413. DOI: 10.13374/j.issn1001-053x.1994.05.002
Citation: Wu Chengyi, Zhang Liying, Yin Hao, Li Xiaojun, Wei Caihong. Study of Microstructure and Properties of High Speed Steel Produced by Spray[J]. Chinese Journal of Engineering, 1994, 16(5): 409-413. DOI: 10.13374/j.issn1001-053x.1994.05.002
shu

喷射成形高速钢显微结构和性能

Study of Microstructure and Properties of High Speed Steel Produced by Spray

    摘要
  • 摘要: 采用光学显微镜、扫描电镜研究了沉积高速钢孔隙的大小、形状、分布及显微结构.测定了试样的力学性能,并与相同成分的铸态、锻造态高速钢进行了对比.结果表明,沉积高速钢显微结构和性能都优于铸态和锻造态高速钢.

     

    Abstract: The microstructure and porosity of high speed steel (HSS) prepared by spary forming have been studied with optical microscope and scanning electron microscope (SEM). Compared to the casted high speed steel with the same composition, the results show that microstructure and the main mechanical properties of the high speed steel prepared by spray forming are superior.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回