蒋大强, 高仲龙, 陈广言, 秦庆寿, 王从今. U型辐射管的表面温度分布[J]. 工程科学学报, 1994, 16(6): 604-607. DOI: 10.13374/j.issn1001-053x.1994.06.021
引用本文: 蒋大强, 高仲龙, 陈广言, 秦庆寿, 王从今. U型辐射管的表面温度分布[J]. 工程科学学报, 1994, 16(6): 604-607. DOI: 10.13374/j.issn1001-053x.1994.06.021
shu
Jiang Daqiang, Gao Zhonglong, Chen Guangyan, Qin Qingshou, Wang Congjin. Surface Temperature Distribution of U-type Radiant Tube Burner[J]. Chinese Journal of Engineering, 1994, 16(6): 604-607. DOI: 10.13374/j.issn1001-053x.1994.06.021
Citation: Jiang Daqiang, Gao Zhonglong, Chen Guangyan, Qin Qingshou, Wang Congjin. Surface Temperature Distribution of U-type Radiant Tube Burner[J]. Chinese Journal of Engineering, 1994, 16(6): 604-607. DOI: 10.13374/j.issn1001-053x.1994.06.021
shu

U型辐射管的表面温度分布

Surface Temperature Distribution of U-type Radiant Tube Burner

    摘要
  • 摘要: 本文分析了影响大型辐射管表面温度分布的因素,通过实验说明,对于单端吸入空气的扩散型燃烧辐射管,使用芯块可以明显地提高燃料的利用率,较好地控制空气消耗系数,强化气体与辐射管管壁之间的对流传热,从而改善辐射管的表面温度分布.

     

    Abstract: The factors having effect on the surface temperature distribution of large U-type radiant tube burner are analysised.For the radiant tube with air singly pulled and diffusively combustioned,the application of corebusters can improve the combustion efficiency significently,control the fuel-air ratio Precisely and enhance the heat transfer between the heigh temperature gases and the tube,thus it can ameliorate the temperature distribution.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回