管克智, 周纪华, 伦怡馨. 热加工中道次间残余应变率对流动应力的影响[J]. 工程科学学报, 1994, 16(S2): 19-22. DOI: 10.13374/j.issn1001-053x.1994.s2.006
引用本文: 管克智, 周纪华, 伦怡馨. 热加工中道次间残余应变率对流动应力的影响[J]. 工程科学学报, 1994, 16(S2): 19-22. DOI: 10.13374/j.issn1001-053x.1994.s2.006
shu
Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. DOI: 10.13374/j.issn1001-053x.1994.s2.006
Citation: Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. DOI: 10.13374/j.issn1001-053x.1994.s2.006
shu

热加工中道次间残余应变率对流动应力的影响

Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing

    摘要
  • 摘要: 采用恒应变速率凸轮式压缩试验机,测定研究了GCr15、16MnNb钢在两道次变形过程中,热加工道次时间间隔对钢流动应力及道次间软化率的影响规律.

     

    Abstract: Using cam-type compression testing maching of the constant strain rate, interval between two passes affecting regular on flow stress and soften rate For steel GCr15 and 16MnNb is studied when hot precessing.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回