唐英, 顾崇衔, 孙荣平, 陈克兴. 金属切削过程声发射机理[J]. 工程科学学报, 1995, 17(5): 439-443. DOI: 10.13374/j.issn1001-053x.1995.05.008
引用本文: 唐英, 顾崇衔, 孙荣平, 陈克兴. 金属切削过程声发射机理[J]. 工程科学学报, 1995, 17(5): 439-443. DOI: 10.13374/j.issn1001-053x.1995.05.008
shu
Tang Ying, Gu Chongxian, Sun Rongping, Chen Kexing. Acoustic Emission Mechanism in Cutting Process[J]. Chinese Journal of Engineering, 1995, 17(5): 439-443. DOI: 10.13374/j.issn1001-053x.1995.05.008
Citation: Tang Ying, Gu Chongxian, Sun Rongping, Chen Kexing. Acoustic Emission Mechanism in Cutting Process[J]. Chinese Journal of Engineering, 1995, 17(5): 439-443. DOI: 10.13374/j.issn1001-053x.1995.05.008
shu

金属切削过程声发射机理

Acoustic Emission Mechanism in Cutting Process

    摘要
  • 摘要: 研究了金属切削过程的声发射机理,建立了正交切削条件下的金属切削过程声发射理论模型,即声发射信号能量与切削参数间的关系模型。通过车削加工过程声发射检测实验,证实了模型的正确性。

     

    Abstract: The mechanism of Acoustic Emission phenomenon in cutting process is studied.A analytical model relating the acoustic emission signal energy content to the cutting process parameters in orthogonal metal cutting is presented.Its correction is confirmed by the result of experiments carried out in turning process.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回