杨卫东. 带钢热连轧变结构与变参数AGC控制算法[J]. 工程科学学报, 1996, 18(4): 363-366. DOI: 10.13374/j.issn1001-053x.1996.04.014
引用本文: 杨卫东. 带钢热连轧变结构与变参数AGC控制算法[J]. 工程科学学报, 1996, 18(4): 363-366. DOI: 10.13374/j.issn1001-053x.1996.04.014
shu
Yang Weidong. Hot Strip Rolling AGC Control Algorithm with Variable Structures and Parameters[J]. Chinese Journal of Engineering, 1996, 18(4): 363-366. DOI: 10.13374/j.issn1001-053x.1996.04.014
Citation: Yang Weidong. Hot Strip Rolling AGC Control Algorithm with Variable Structures and Parameters[J]. Chinese Journal of Engineering, 1996, 18(4): 363-366. DOI: 10.13374/j.issn1001-053x.1996.04.014
shu

带钢热连轧变结构与变参数AGC控制算法

Hot Strip Rolling AGC Control Algorithm with Variable Structures and Parameters

    摘要
  • 摘要: 给出了带钢热连轧变结构与变参数AGC新算法。试验表明,在大初始偏差下,该算法比传统AGC控制算法的批量轧制合格率提高5%~10%,并减少了AGC投入后对板形的影响。

     

    Abstract: The new AGC algorithm with variable structurs and parameters was gived.It has proved in practice that in large initial thickness error condition the lot rolling qualified rate increase 5%~10% and the influence to flatness after AGC putting in work is reduced.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回