余宗森, 袁泽喜, 李定秀, 李士琦, 武骏. 鞍钢钢材成分与其力学性能的定量关系[J]. 工程科学学报, 1997, 19(5): 510-515. DOI: 10.13374/j.issn1001-053x.1997.05.020
引用本文: 余宗森, 袁泽喜, 李定秀, 李士琦, 武骏. 鞍钢钢材成分与其力学性能的定量关系[J]. 工程科学学报, 1997, 19(5): 510-515. DOI: 10.13374/j.issn1001-053x.1997.05.020
shu
Yu Zongsen, Yuan Zexi, Li Dingxiu, Li Shiqi, Wu Jun. Quantitative Relationship Between Mechanical Properties and Chemocal Compositions of Steels Made by Anshan Iron and Steel Corporation[J]. Chinese Journal of Engineering, 1997, 19(5): 510-515. DOI: 10.13374/j.issn1001-053x.1997.05.020
Citation: Yu Zongsen, Yuan Zexi, Li Dingxiu, Li Shiqi, Wu Jun. Quantitative Relationship Between Mechanical Properties and Chemocal Compositions of Steels Made by Anshan Iron and Steel Corporation[J]. Chinese Journal of Engineering, 1997, 19(5): 510-515. DOI: 10.13374/j.issn1001-053x.1997.05.020
shu

鞍钢钢材成分与其力学性能的定量关系

Quantitative Relationship Between Mechanical Properties and Chemocal Compositions of Steels Made by Anshan Iron and Steel Corporation

    摘要
  • 摘要: 根据由鞍钢100炉次钢材试样的化学成分全分析、显微组织参数和力学性能测定的结果，采用统计方法分析了钢材成分（包括痕量元素）、组织与其力学性能的关系，得出了成分、组织与其力学性能之间的回归方程，并将鞍钢钢材的成分与宝钢钢材成分作了比较.

     

    Abstract: Samples of 100 heats were collected from Anshan Iron and Steel Corpo ration (Angang). Their mechanical properties and microstructural parameters were measured and comprehensive chemical analysis was made. The regressive formulae of the relationship between mechanical properties and chemical compositions along with microstructural parameters are given. The comparison of chemical compositions is made between steel products of Angang and Baoshan Iron and Steel Works.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回