李应强, 杨文平. 螺板轧机锥辊理论辊缝[J]. 工程科学学报, 1997, 19(S1): 74-76. DOI: 10.13374/j.issn1001-053x.1997.s1.019
引用本文: 李应强, 杨文平. 螺板轧机锥辊理论辊缝[J]. 工程科学学报, 1997, 19(S1): 74-76. DOI: 10.13374/j.issn1001-053x.1997.s1.019
shu
Li Yingqiang, Yang Wenping. On the Bite of Spiral Flight Rolling Mill[J]. Chinese Journal of Engineering, 1997, 19(S1): 74-76. DOI: 10.13374/j.issn1001-053x.1997.s1.019
Citation: Li Yingqiang, Yang Wenping. On the Bite of Spiral Flight Rolling Mill[J]. Chinese Journal of Engineering, 1997, 19(S1): 74-76. DOI: 10.13374/j.issn1001-053x.1997.s1.019
shu

螺板轧机锥辊理论辊缝

On the Bite of Spiral Flight Rolling Mill

    摘要
  • 摘要: 通过轧机调整参数的研究，提出实用的共轭理论辊缝解析法，结合考虑其它影响参数的修正，可对螺旋叶片轧制参数调整起到重要指导意义.

     

    Abstract: Based on study of the parameters for adjusting the rolling mill and the practical analyzing method the conjugate theory is put forward. Combining the correction of the other effective parameters, it will be important to adjust the paramaters for rolling screw blades.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回