王宝雨, 胡正寰. 楔横轧楔入轧制接触面几何形式[J]. 工程科学学报, 1998, 20(2): 169-173. DOI: 10.13374/j.issn1001-053x.1998.02.039
引用本文: 王宝雨, 胡正寰. 楔横轧楔入轧制接触面几何形式[J]. 工程科学学报, 1998, 20(2): 169-173. DOI: 10.13374/j.issn1001-053x.1998.02.039
shu
Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. DOI: 10.13374/j.issn1001-053x.1998.02.039
Citation: Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. DOI: 10.13374/j.issn1001-053x.1998.02.039
shu

楔横轧楔入轧制接触面几何形式

Contact Surface of Cross Wedge Rolling during Wedge

    摘要
  • 摘要: 在对楔入轧制过程分析的基础上,建立了板式楔横轧楔入轧制接触面的数学模型,确定了轧制接触面方程及其边界方程,以及不同工艺条件、不同轧制阶段下的接触面几何形式.

     

    Abstract: Based on the analysis of the process of cross wedge rolling at the first stage wedge in,the geometry model of rolling area has been established. The contact surface equations and boundary curve equations have been deduced. Contact surface of cross wedge rolling in different conditions and stage has obtained.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回