闫晓强, 刘福礼, 孙复森, 胡孔白, 肖景顺. 四辊中板轧机钢板波浪生成与抑制之六——辊系偏移距的确定[J]. 工程科学学报, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021
引用本文: 闫晓强, 刘福礼, 孙复森, 胡孔白, 肖景顺. 四辊中板轧机钢板波浪生成与抑制之六——辊系偏移距的确定[J]. 工程科学学报, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021
shu
Yan Xiaoqiang, Liu Fuli, Sun Fusen, Hu Kongbai, Xiao Jingshun. Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills[J]. Chinese Journal of Engineering, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021
Citation: Yan Xiaoqiang, Liu Fuli, Sun Fusen, Hu Kongbai, Xiao Jingshun. Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills[J]. Chinese Journal of Engineering, 1999, 21(3): 292-293. DOI: 10.13374/j.issn1001-053x.1999.03.021
shu

四辊中板轧机钢板波浪生成与抑制之六——辊系偏移距的确定

Forming and Curbing of Jobbing Sheet Waviness on Four High Jobbing Sheet Mill (6)——Optimum offset model for the four high mills

    摘要
  • 摘要: 首次考虑摩擦弯矩和附加弯矩对辊系稳定性的影响,建立了四辊轧机辊系最佳偏移距模型.

     

    Abstract: The effects of friction moment and additional moment on the stability of rolls for the first time was considered and the optimum offset model for the four high mills was set up.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回