祝东奎, 张清东, 陈守群, 杨建明, 吴彬. 兼顾板形的带钢冷连轧机最优化负荷分配[J]. 工程科学学报, 2000, 22(1): 80-83. DOI: 10.13374/j.issn1001-053x.2000.01.046
引用本文: 祝东奎, 张清东, 陈守群, 杨建明, 吴彬. 兼顾板形的带钢冷连轧机最优化负荷分配[J]. 工程科学学报, 2000, 22(1): 80-83. DOI: 10.13374/j.issn1001-053x.2000.01.046
shu
ZHU Dongkui, ZHANG Qingdong, CHEN Shouqun, YANG Jianming, WU Bin. Optimum Distribution of Loads on Tandem Cold Mill Being Helpful to Shape Control[J]. Chinese Journal of Engineering, 2000, 22(1): 80-83. DOI: 10.13374/j.issn1001-053x.2000.01.046
Citation: ZHU Dongkui, ZHANG Qingdong, CHEN Shouqun, YANG Jianming, WU Bin. Optimum Distribution of Loads on Tandem Cold Mill Being Helpful to Shape Control[J]. Chinese Journal of Engineering, 2000, 22(1): 80-83. DOI: 10.13374/j.issn1001-053x.2000.01.046
shu

兼顾板形的带钢冷连轧机最优化负荷分配

Optimum Distribution of Loads on Tandem Cold Mill Being Helpful to Shape Control

    摘要
  • 摘要: 在分析现有带钢冷连轧机组所采用的轧制负荷分配方法的基础上,提出了一种兼顾板形控制要求的最优等负荷分配模型,并编制了仿真程序.仿真结果与工业实验的结果是吻合的.

     

    Abstract: A kind of model of the optimum distribution of loads being holpful to shape control has been introduced on the base of the analysis of models used in tandem cold mills at present. And a simulating program has been built. The result of this program has been tested by the industrial experment.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回