张硕生, 余达太. 轮式移动机械手的优化构形[J]. 工程科学学报, 2000, 22(6): 565-568. DOI: 10.13374/j.issn1001-053x.2000.06.021
引用本文: 张硕生, 余达太. 轮式移动机械手的优化构形[J]. 工程科学学报, 2000, 22(6): 565-568. DOI: 10.13374/j.issn1001-053x.2000.06.021
ZHANG Shuosheng, YU Datai. Optimal Configurator of Wheeled Mobile Manipulator[J]. Chinese Journal of Engineering, 2000, 22(6): 565-568. DOI: 10.13374/j.issn1001-053x.2000.06.021
Citation: ZHANG Shuosheng, YU Datai. Optimal Configurator of Wheeled Mobile Manipulator[J]. Chinese Journal of Engineering, 2000, 22(6): 565-568. DOI: 10.13374/j.issn1001-053x.2000.06.021

轮式移动机械手的优化构形

Optimal Configurator of Wheeled Mobile Manipulator

  • 摘要: 为了揭示移动平台和机械手间的本质关系,可将移动机械手加以简化.采用等质量矩阵方法研究了轮式移动机械手的优化构形,得到了最大操作度方向与移动机械手构形间的关系.此关系为进一步研究移动机械手的协调方法打下了一定基础.

     

    Abstract: In order to obtain the essence relation between mobile platform and manipulator, wheeled mobile manipulator's optimal configuration was discussed based on simplified mobile manipulator and equivalent mass matrix, then the relation between the direction of maximal manipulability and mobility manipulator's configurations was derived. The relation will be a base for further investigating mobile manipulator's coordination.

     

/

返回文章
返回