吴耀光. 电弧炉冶炼20Cr2Ni4A渗碳轴承钢[J]. 工程科学学报, 2001, 23(1): 12-14. DOI: 10.13374/j.issn1001-053x.2001.01.030
引用本文: 吴耀光. 电弧炉冶炼20Cr2Ni4A渗碳轴承钢[J]. 工程科学学报, 2001, 23(1): 12-14. DOI: 10.13374/j.issn1001-053x.2001.01.030
shu
WU Yaoguang. Carburized Bearing Steel 20CrZNi4A Melting with EAF[J]. Chinese Journal of Engineering, 2001, 23(1): 12-14. DOI: 10.13374/j.issn1001-053x.2001.01.030
Citation: WU Yaoguang. Carburized Bearing Steel 20CrZNi4A Melting with EAF[J]. Chinese Journal of Engineering, 2001, 23(1): 12-14. DOI: 10.13374/j.issn1001-053x.2001.01.030
shu

电弧炉冶炼20Cr2Ni4A渗碳轴承钢

Carburized Bearing Steel 20CrZNi4A Melting with EAF

    摘要
  • 摘要: 开发了用10tEAF熔炼20Cr2Ni4A渗碳轴承钢的工艺过程.结果表明,在合理的试验条件下,能获得WH<5x10-6电解杂质总量合格的产品,因此,单一电弧炉冶炼是可行的.

     

    Abstract: The development of the carburized bearing steel 20CrZNi4A with 10 t EAF, was introduced. The results show that the finishing product, with wH<10-6 and lower inclusion content, was producted by the single Electro ARC Furnace.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回