舒俊, 金山同, 张丽, 曹卫文, 宋任波, 王向光. 冷却速率对连铸保护渣结晶性能的影响[J]. 工程科学学报, 2001, 23(5): 421-423. DOI: 10.13374/j.issn1001-053x.2001.05.009
引用本文: 舒俊, 金山同, 张丽, 曹卫文, 宋任波, 王向光. 冷却速率对连铸保护渣结晶性能的影响[J]. 工程科学学报, 2001, 23(5): 421-423. DOI: 10.13374/j.issn1001-053x.2001.05.009
shu
SHU Jun, JIN Shantong, ZHANG Li, CAO Weiwen, SONG Renbo, WANG Xiangguang. Influence of Cooling Rate on Crystallization Properties of Mold Fluxes[J]. Chinese Journal of Engineering, 2001, 23(5): 421-423. DOI: 10.13374/j.issn1001-053x.2001.05.009
Citation: SHU Jun, JIN Shantong, ZHANG Li, CAO Weiwen, SONG Renbo, WANG Xiangguang. Influence of Cooling Rate on Crystallization Properties of Mold Fluxes[J]. Chinese Journal of Engineering, 2001, 23(5): 421-423. DOI: 10.13374/j.issn1001-053x.2001.05.009
shu

冷却速率对连铸保护渣结晶性能的影响

Influence of Cooling Rate on Crystallization Properties of Mold Fluxes

    摘要
  • 摘要: 采用 WCT-2型差热分析天平和LEITZ光学显微镜(配有 1350℃高温热台),研究了冷却速率对连铸保护渣结晶性能的影响.研究结果表明:随冷却速率提高,保护渣的结晶温度显著降低,结晶率降低,晶体尺寸减小,晶形也有很大改变.

     

    Abstract: The influence of cooling rate on the crystallization properties of mold fluxes was studied by WCT-2 Differential Thermal Analysis(DTA) balance and LEITZ optical microscope equipped with 1350CC heating stage. Increasing cooling rate, the crystallization temperature, crystallization ratio, and the size of crys-tal is reduced, and the morphology of crystal is also changed greatly.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回