李翔, 白皓, 苍大强, 陶保国, 邹展, 穆建忠. 固体颗粒床高温除尘器的等温实验研究[J]. 工程科学学报, 2004, 26(1): 18-21. DOI: 10.13374/j.issn1001-053x.2004.01.006
引用本文: 李翔, 白皓, 苍大强, 陶保国, 邹展, 穆建忠. 固体颗粒床高温除尘器的等温实验研究[J]. 工程科学学报, 2004, 26(1): 18-21. DOI: 10.13374/j.issn1001-053x.2004.01.006
LI Xiang, BAI Hao, CANG Daqiang, TAO Baoguo, ZOU Zhan, MU Jianzhong. Isothermal Experiment Research of a High Temperature Granular Bed Filter[J]. Chinese Journal of Engineering, 2004, 26(1): 18-21. DOI: 10.13374/j.issn1001-053x.2004.01.006
Citation: LI Xiang, BAI Hao, CANG Daqiang, TAO Baoguo, ZOU Zhan, MU Jianzhong. Isothermal Experiment Research of a High Temperature Granular Bed Filter[J]. Chinese Journal of Engineering, 2004, 26(1): 18-21. DOI: 10.13374/j.issn1001-053x.2004.01.006

固体颗粒床高温除尘器的等温实验研究

Isothermal Experiment Research of a High Temperature Granular Bed Filter

  • 摘要: 针对工业界提出的高温除尘问题,采用固体颗粒床除尘方式,对用砂粒作为过滤介质的可行性和实用性进行了研究.通过模拟高炉一次除尘后的含尘气体浓度,进行了固体颗粒床除尘器的等温实验,探索了气体过滤速度、过滤床层厚度对除尘器除尘效率和床层压力损失的影响.根据实验结果,确定了最佳过滤速度和过滤床层厚度.

     

    Abstract: A kind of filter with sand as the percolation medium for dust-removing were discussed and designed for isothermal experiment. Through the experiment by this fiter simulating the BF top gas sub-dedusting, the effect of the thickness of the fiter layer and the filtration gas velocity upon the dust-removing efficiency and the pressure loss was investigated. Based on the experimental results, the optimized thickness of the filter layer and the optimized velocity of filtration gas were confirmed.

     

/

返回文章
返回