李素芹, 熊国宏, 李士琦, 朱荣, 王新华, 陈原. 极低硫钢的精炼脱硫动力学模型[J]. 工程科学学报, 2004, 26(3): 244-246. DOI: 10.13374/j.issn1001-053x.2004.03.005
引用本文: 李素芹, 熊国宏, 李士琦, 朱荣, 王新华, 陈原. 极低硫钢的精炼脱硫动力学模型[J]. 工程科学学报, 2004, 26(3): 244-246. DOI: 10.13374/j.issn1001-053x.2004.03.005
shu
LI Suqin, XIONG Guohong, LI Shiqi, ZHU Rong, WANG Xinhua, CHEN Yuan. Dynamic Model Applied in Ultra-low Sulphur Steel Refining Desurlfurization Process[J]. Chinese Journal of Engineering, 2004, 26(3): 244-246. DOI: 10.13374/j.issn1001-053x.2004.03.005
Citation: LI Suqin, XIONG Guohong, LI Shiqi, ZHU Rong, WANG Xinhua, CHEN Yuan. Dynamic Model Applied in Ultra-low Sulphur Steel Refining Desurlfurization Process[J]. Chinese Journal of Engineering, 2004, 26(3): 244-246. DOI: 10.13374/j.issn1001-053x.2004.03.005
shu

极低硫钢的精炼脱硫动力学模型

Dynamic Model Applied in Ultra-low Sulphur Steel Refining Desurlfurization Process

    摘要
  • 摘要: 通过对影响脱硫反应限制性环节的分析,将持续接触和瞬时接触两种反应模式综合考虑,建立了精炼脱硫动力学模型,并通过实验室“极低硫钢精炼脱硫”实验数据对模型进行验证.结果表明,本模型的预测结果与实验结果比较吻合.

     

    Abstract: By analyzing the bottle-neck of desulphurization reacton, a kinetic model applied in refining desurlfurization process was developed based on two kind of calculating reactive modes: both durative contact mode and temporary contact mode. The results show that this model is in good agreement with the experimental data.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回