王宝雨, 何涛, 胡正寰. 偏心轴类零件楔横轧轧制力分析[J]. 工程科学学报, 2007, 29(S2): 148-151. DOI: 10.13374/j.issn1001-053x.2007.s2.071
引用本文: 王宝雨, 何涛, 胡正寰. 偏心轴类零件楔横轧轧制力分析[J]. 工程科学学报, 2007, 29(S2): 148-151. DOI: 10.13374/j.issn1001-053x.2007.s2.071
shu
WANG Baoyu, HE Tao, HU Zhenghuan. Research on rolling pressure of cross wedge rolling of parts with eccentric section[J]. Chinese Journal of Engineering, 2007, 29(S2): 148-151. DOI: 10.13374/j.issn1001-053x.2007.s2.071
Citation: WANG Baoyu, HE Tao, HU Zhenghuan. Research on rolling pressure of cross wedge rolling of parts with eccentric section[J]. Chinese Journal of Engineering, 2007, 29(S2): 148-151. DOI: 10.13374/j.issn1001-053x.2007.s2.071
shu

偏心轴类零件楔横轧轧制力分析

Research on rolling pressure of cross wedge rolling of parts with eccentric section

    摘要
  • 摘要: 利用有限元手段对偏心轴类零件楔横轧轧制成形中的轧制区轧制力进行了系统全面地研究,在此基础上分析了偏心轴类零件楔横轧非轧制区接触力的产生原因及其对偏心轴类零件楔横轧轧制成形带来的影响.研究结果对认清偏心轴类零件楔横轧轧制成形机理、旋转条件、偏心极限都具有十分重要的意义.

     

    Abstract: The rolling force of rolling zone were completely and systematically analyzed by using FEM.Based on these researches,the cause and the affection of contact force of non-rolling zone were found out.The researches were benefit to understanding of the forming mechanism,rotating conditions and eccentric limit of cross wedge rolling of parts with eccentric section.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回