Abstract: Clad steel pipes of 20Cr/1Cr18Ni9Ti were prepared by centrifugal casting and extruding. The interracial microstructure of the preproduction clad steel pipes was analyzed by SEM and the mechanical properties were tested by tensile test and thermal cycling test. The results show that the clad steel pipes get completely metallurgical bonding interface with greatly increased bonding strength and their processability and service performance are improved due to transversal area in the interface. It is indicated that not only the centrifugal casting and extruding process can be used to produce the clad steel pipes with better microstructure and properties, but also its working procedure is simple and its production cost is low.