乔建生, 黄依娜, 肖鑫, 万发荣. 450℃高能电子辐照对CLAM钢微观结构的影响[J]. 工程科学学报, 2009, 31(7): 842-847. DOI: 10.13374/j.issn1001-053x.2009.07.043
引用本文: 乔建生, 黄依娜, 肖鑫, 万发荣. 450℃高能电子辐照对CLAM钢微观结构的影响[J]. 工程科学学报, 2009, 31(7): 842-847. DOI: 10.13374/j.issn1001-053x.2009.07.043
QIAO Jian-sheng, HUANG Yi-na, XIAO Xin, WAN Fa-rong. Microstructural evolution of CLAM steel upon high energy electron irradiation at 450℃[J]. Chinese Journal of Engineering, 2009, 31(7): 842-847. DOI: 10.13374/j.issn1001-053x.2009.07.043
Citation: QIAO Jian-sheng, HUANG Yi-na, XIAO Xin, WAN Fa-rong. Microstructural evolution of CLAM steel upon high energy electron irradiation at 450℃[J]. Chinese Journal of Engineering, 2009, 31(7): 842-847. DOI: 10.13374/j.issn1001-053x.2009.07.043

450℃高能电子辐照对CLAM钢微观结构的影响

Microstructural evolution of CLAM steel upon high energy electron irradiation at 450℃

  • 摘要: 为了研究低活化马氏体CLAM钢的抗辐照肿胀性能,在450℃下对CLAM钢进行大剂量高能电子辐照的原位动态实验.利用超高压透射电子显微镜观察发现,CLAM钢中产生了大量的间隙原子型位错环和多面体形状的辐照空洞.分析了它们的形核和长大规律以及相关机制.计算表明,CLAM钢在高能电子辐照下的最大肿胀率为0.26%,具有较好的抗辐照肿胀性能.

     

    Abstract: To research the resistance of China low activation martensitic (CLAM) steel to irradiation swelling, the microstructure of CLAM steel irradiated by high energy elections at 450℃ was in-situ observed on a high voltage electron microscope. The results indicate that a lot of voids and dislocation loops form by irradiation. The dependence of the amount and size of these damages on the irradiation dose are evaluated and discussed. The irradiation swelling is about 0.26% and thus CLAM steel is considered as a material with high resistance to swelling.

     

/

返回文章
返回